Dynamic Friction 600-03043 Disc Brake Rotor - Front

Front Vented Brake Rotor for Santa Fe

The Dynamic Friction DFC Brake Rotor, part number 600-03043, is a front disc brake rotor for select Hyundai Santa Fe applications. It is built as a vented rotor with a 276 mm outside diameter, 26 mm nominal thickness, and 24.4 mm discard thickness for service replacement on the front axle.

Compatible With 2001-2005 Hyundai Santa Fe front brake applications, this rotor is sized for vehicles using a 5-bolt pattern with a 12.6 mm bolt hole diameter, 69 mm inside diameter, and 46.3 mm overall height. The DFC Brake Rotor line focuses on direct-fit brake service parts for common passenger vehicle applications.

Key Features

• Part number 600-03043
• Front disc brake rotor for Hyundai Santa Fe
• Vented rotor design for front brake service
• 276 mm outside diameter
• 26 mm nominal thickness and 24.4 mm discard thickness
• 5-bolt mounting pattern
• 46.3 mm height with 69 mm inside diameter

Detailed Product Overview

This Dynamic Friction rotor is specified for front use on 2001-2005 Hyundai Santa Fe models, including 2001-2002 Hyundai Santa Fe front and 2003-2005 Hyundai Santa Fe front with 276 mm front rotors. The vented construction helps support heat dissipation during repeated braking, while the listed dimensions provide the fitment reference needed for rotor replacement. If you are sourcing a Hyundai Santa Fe front brake rotor, part number 600-03043 gives you a direct match to the listed application.

Common Brake Issues This Rotor Can Address

• Worn rotor surfaces that no longer meet service thickness
• Brake pulsation caused by rotor wear or uneven braking surfaces
• Noise from damaged or heavily scored front rotors
• Reduced braking consistency from heat-affected rotor condition
• Front brake service on a Hyundai Santa Fe with the correct 276 mm rotor size

Installation Notes and Tips

Verify rotor dimensions, bolt pattern, and front axle application before installation. Confirm that your vehicle matches the listed Hyundai Santa Fe year range and rotor size, especially on 2003-2005 models that use 276 mm front rotors. Inspect pads, caliper condition, and hub mounting surfaces during brake service to help ensure proper rotor seating and even braking performance.

Quality Assurance

DFC Brake Rotor parts are identified by clear dimensional specifications and application data for accurate brake service selection. Part number 600-03043 is cataloged for the listed Hyundai Santa Fe front applications.