Dynamic Friction 600-11005 Disc Brake Rotor - Front

Front Vented Brake Rotor for Discovery

The Dynamic Friction DFC Brake Rotor, part number 600-11005, is a front disc brake rotor for 1999-2004 Land Rover Discovery applications. It is built as a vented rotor with a 298 mm outside diameter and OE-style dimensions for direct brake service on the front axle.

Key Features

• Brand: Dynamic Friction DFC Brake Rotor
• Part number: 600-11005
• Front disc brake rotor for Land Rover Discovery
• Vented rotor design for front brake use
• Outside diameter: 298 mm
• Nominal thickness: 25 mm
• Discard thickness: 22 mm
• Bolt hole quantity: 5
• Bolt hole diameter: 14.25 mm
• Inside diameter: 70.1 mm
• Height: 91.5 mm

Detailed Description

This DFC Brake Rotor is specified for 1999-2004 Land Rover Discovery front brake applications and follows the listed rotor dimensions for proper fitment on the front hub assembly. The vented construction helps manage heat during repeated braking, while the 25 mm nominal thickness and 22 mm discard thickness provide the dimensional reference needed when servicing worn front rotors. If you are replacing a front rotor on a Land Rover Discovery, part number 600-11005 gives you a direct-match reference for the correct brake service part.

The DFC Brake Rotor line from Dynamic Friction focuses on application-specific brake components with the measurements needed for accurate replacement selection. For shoppers comparing Land Rover Discovery brake rotor options, this front rotor is identified by its 298 mm outside diameter, 5-bolt pattern, and 91.5 mm height.

What It Helps Fix

• Brake pulsation from a worn or uneven front rotor
• Reduced braking consistency caused by rotor wear
• Front-end vibration during braking
• Rotor replacement needs after reaching discard thickness
• Service issues on 1999-2004 Land Rover Discovery front brakes

Installation Notes and Tips

Fits 1999-2004 Land Rover Discovery, front. Verify rotor dimensions, hub fit, and brake system condition before installation. Inspect pads, caliper hardware, and wheel-end components at the same time so the new rotor can seat evenly and perform as intended. Confirm the vehicle’s front brake specification against the listed measurements, including 298 mm outside diameter and 5-bolt configuration, before final assembly.

Quality Assurance

Part number 600-11005 is cataloged as a Dynamic Friction DFC Brake Rotor and listed with defined dimensional specifications for application matching. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.