Dynamic Friction 600-13007 Disc Brake Rotor - Front

Front Vented Brake Rotor for Subaru Impreza and Legacy

The Dynamic Friction DFC Brake Rotor 600-13007 is a front disc brake rotor built for Subaru applications that use a 260 mm vented rotor design. It is listed for select Subaru Impreza and Subaru Legacy models, including fitments with 14-inch wheels on certain Impreza applications.

Key Features

• Part number: 600-13007
• DFC Brake Rotor product line from Dynamic Friction
• Front disc brake rotor for Subaru Impreza and Subaru Legacy
• Vented rotor construction for front axle use
• 260 mm outside diameter
• 24 mm nominal thickness and 22 mm discard thickness
• 5-bolt hole design with 12.8 mm bolt hole diameter
• 58 mm inside diameter and 56.8 mm height

Detailed Description

This Dynamic Friction DFC Brake Rotor 600-13007 is a vented front rotor engineered around the listed Subaru brake dimensions, including 260 mm outside diameter, 24 mm nominal thickness, and 22 mm discard thickness. It is a direct-fit style replacement for front brake service on 1990-2000 Subaru Legacy and 1993-2001 Subaru Impreza applications that use the specified rotor configuration. The DFC Brake Rotor line focuses on application-specific rotor sizing, making this part a practical choice when replacing a worn front rotor on Subaru Impreza or Legacy models.

Compatible With: Fits 1993-2001 Subaru Impreza, front. Fits 1990-2000 Subaru Legacy, front. Fits 1994-1995 Subaru Impreza, front, 14" wheels; 260 mm front rotors. Fits 1994 Subaru Impreza, front, 14" wheels. Fits 1993 Subaru Impreza, front, 260 mm front rotors.

Common Problems This Rotor Can Address

• Brake pulsation caused by rotor wear or thickness variation
• Reduced braking performance from a worn front rotor surface
• Noise from a rotor that is below service thickness
• Uneven braking feel on Subaru front brake service
• Rotor replacement needs during front brake maintenance

Installation Notes and Tips

Verify rotor dimensions, wheel size, and front brake configuration before installation. This rotor is listed for vented front applications only, so confirm the vehicle uses a 260 mm front rotor setup and the correct bolt pattern and hub dimensions. For best results, inspect pads, caliper condition, and hub surfaces during service, and measure rotor thickness against the discard specification before reuse decisions.

Quality Assurance

The DFC Brake Rotor line is built around application-specific fitment and dimensional accuracy for listed Subaru models. Part number 600-13007 is cataloged for confirmed front fitments on Subaru Impreza and Subaru Legacy applications.