Dynamic Friction 600-13019 Disc Brake Rotor - Rear

Dynamic Friction DFC Rear Brake Rotor

The Dynamic Friction DFC Brake Rotor, part number 600-13019, is a vented rear disc brake rotor built for specific Subaru applications. It is sized for 2005-2009 Subaru Legacy rear and 2006-2007 Subaru Impreza rear fitments, with dimensions that support direct replacement service.

Key Features

• Part number 600-13019 from Dynamic Friction
• DFC Brake Rotor product line
• Vented rotor design for rear brake service
• Outside diameter: 290 mm
• Nominal thickness: 17.9 mm
• Discard thickness: 16 mm
• Height: 67.5 mm
• 5-bolt hole pattern with 12.8 mm bolt hole diameter
• Inside diameter: 58 mm

Detailed Description

This Dynamic Friction DFC Brake Rotor is engineered as a rear disc brake rotor for Subaru Legacy and Subaru Impreza applications listed in the fitment data. The vented construction helps manage heat during braking, while the 290 mm outside diameter, 17.9 mm nominal thickness, and 67.5 mm height provide the dimensional profile needed for the specified rear axle applications. If you are sourcing a rear brake rotor for a 2005-2009 Subaru Legacy or a 2006-2007 Subaru Impreza, part number 600-13019 is the direct reference to verify against your existing rotor.

The DFC Brake Rotor line from Dynamic Friction focuses on replacement brake components for service work where correct dimensions and fitment matter. This rotor is a 5-bolt, vented design with a 58 mm inside diameter and 12.8 mm bolt hole diameter, making it a practical choice for rear brake maintenance on the listed Subaru models. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

Vehicle Fitment

• Fits 2005-2009 Subaru Legacy, rear.
• Fits 2006-2007 Subaru Impreza, rear.

What It Helps Address

• Rear brake pulsation caused by rotor wear or uneven surface condition
• Reduced braking consistency from a rotor that has reached discard thickness
• Brake noise related to worn or heat-affected rear rotors
• Service replacement needs for Subaru Legacy rear brake repair
• Service replacement needs for Subaru Impreza rear brake repair

Installation Notes and Tips

Confirm rotor dimensions, bolt pattern, and rear position before installation. Compare the existing rotor’s outside diameter, height, and thickness measurements to part number 600-13019 to verify application match on the vehicle. For best results, inspect pads, caliper condition, and hub mounting surfaces during brake service, and follow the vehicle manufacturer’s service procedure.

Quality Assurance

Use the published specifications and fitment data to confirm application accuracy before installation. The DFC Brake Rotor line is positioned as a dedicated brake replacement product line from Dynamic Friction for service-focused repairs.