Dynamic Friction 600-48086 Disc Brake Rotor - Front

Overview

This Dynamic Friction DFC brake rotor is built for applications that require a vented disc brake rotor with an 8-hole pattern and a 306.5 mm outside diameter. It is listed for Workhorse W42 front brake applications and is identified by part number 600-48086.

Key Features

• Vented rotor design for improved heat dissipation.
• 8 bolt holes with a 14.9 mm bolt hole diameter.
• 306.5 mm outside diameter and 97.5 mm height.
• 25 mm discard thickness and 27.6 mm nominal thickness.
• 44 mm inside diameter for the specified hub interface.

Detailed Description

DFC Brake Rotor 600-48086 is a vented disc brake rotor engineered around the listed dimensions and mounting pattern. The rotor’s 8-hole configuration, 306.5 mm outside diameter, and 97.5 mm height make it a direct match for the specified Workhorse W42 front application. If you are replacing a worn rotor on a Workhorse W42, part number 600-48086 provides the dimensional fit needed for the listed front brake setup.

Common Issues It Can Address

• Rotor wear that has reduced braking surface thickness.
• Brake pulsation caused by an out-of-spec rotor.
• Heat buildup in a vented rotor application.
• Fitment problems from incorrect bolt pattern or dimensions.

Installation Notes

Verify the rotor dimensions, bolt hole count, and hub measurements against the existing part before installation. Confirm the vehicle’s front brake configuration and compare the 8-hole, 306.5 mm rotor specification to the original equipment setup. For fitment reference, this part fits 2006-2011 Workhorse W42, front.

Quality Assurance

Dynamic Friction supplies this DFC Brake Rotor as a dimension-specific replacement part for the listed application. Part number 600-48086 should be matched to the vehicle’s brake specifications and mounting pattern before installation.