Dynamic Friction 600-59043 Disc Brake Rotor - Front

DFC Brake Rotor for Front Brake Service

The Dynamic Friction DFC Brake Rotor, part number 600-59043, is a front vented disc brake rotor built for select Acura and Honda applications. It is sized for common OE-style replacement needs on vehicles such as the Acura TSX, Honda Accord, Acura TL, Honda Pilot, Acura MDX, Honda Odyssey, and Acura CL.

The DFC Brake Rotor line focuses on direct-fit brake rotor replacement for everyday service work. This rotor uses a vented design with a 300 mm outside diameter, 47.2 mm height, 5 bolt holes, and a 12.6 mm bolt hole diameter to match the listed front brake applications.

Key Features

• Part number 600-59043 front disc brake rotor
• Vented rotor design for front brake use
• Outside diameter: 300 mm
• Height: 47.2 mm
• Nominal thickness: 28 mm
• Discard thickness: 26 mm
• Inside diameter: 64.1 mm
• 5-bolt pattern with 12.6 mm bolt hole diameter
• Compatible with select Acura and Honda front brake applications

Detailed Description

This Dynamic Friction rotor is specified for front axle brake service on 2004-2014 Acura TSX, 2003-2012 Honda Accord, 1999-2008 Acura TL, 2003-2008 Honda Pilot, 2001-2006 Acura MDX, 1999-2004 Honda Odyssey, and 2001-2003 Acura CL. If you are replacing a worn front rotor on a Honda Accord or Acura TL, part number 600-59043 provides the dimensional match needed for the listed vehicles.

Use this rotor when the original front disc shows wear near discard thickness, uneven braking surfaces, or heat-related distortion. The vented construction supports front brake cooling in normal driving and service conditions.

Common Reasons for Replacement

• Brake pulsation during stopping
• Rotor scoring or surface wear
• Thickness approaching discard specification
• Noise from worn front brake components
• Heat spots or visible rotor distortion

Installation Notes and Tips

Confirm rotor dimensions, bolt pattern, and hub fitment before installation. Clean the hub mounting surface thoroughly so the new rotor seats flat, and inspect pads, calipers, and hardware condition during brake service. For best results, measure rotor thickness after installation and verify proper brake operation before returning the vehicle to service.

Quality Assurance

Manufactured under the Dynamic Friction DFC Brake Rotor product line for direct replacement use on the listed Acura and Honda front applications. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.