/live/media/DF/DF_63113017R_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Dynamic Friction 631-13017R Disc Brake Rotor - Rear Right
| Brand | Dynamic Friction 631-13017R |
|---|---|
| Position | Rear Right |
| Discard Thickness | 18 |
| Nominal Thickness | 20 |
| Bolt Hole Diameter | 12.9 |
| Disc Finish | Plain |
| Hat Finish | Zinc silver |
| Rust Resistant Coating | Yes |
| Bolt Hole Quantity | 5 |
| Overall Height | 67.5 |
| Outside Diameter | 316 |
| Height | 67.5 |
| Surface Type | Slotted x drilled |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 58 |
| Stud/Lug Hole Quantity | 5 |
| Stud/Lug Hole Diameter | 12.9 |
| Directional or Non-Directional Brake Surface | Directional |
| Bolt Circle Diameter | 114.3 |
| Stud/Lug Hole Circle Diameter | 114.3 |
| Product line | DFC Brake Rotor - Drilled and Slotted - Silver |
| Fits | Subaru · 3 vehicles |
Drilled and slotted. Surface design helps maintain consistent brake contact and response.
Vented construction. Built to promote airflow through the rotor during braking.
Rust-resistant finish. Zinc silver hat coating adds corrosion protection and a clean look.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Overview
This Dynamic Friction disc brake rotor is built for fitment on the rear right side of select Subaru Impreza applications. It features a slotted and drilled surface, vented construction, and a zinc silver hat finish for a clean, corrosion-resistant appearance.
Part number 631-13017R is a direct-fit rotor for drivers looking for a replacement that matches the specified bolt pattern and dimensions. It is a practical choice for Subaru Impreza brake service where rotor surface design and corrosion protection matter.
Key Features
- Slotted X drilled rotor surface for consistent brake contact.
- Vented rotor design for improved heat management.
- Zinc silver hat finish with rust-resistant coating.
- Directional brake surface design.
- Five-lug pattern with 114.3 mm bolt circle.
Detailed Description
The Dynamic Friction 631-13017R brake rotor is engineered with a slotted and drilled braking surface, vented construction, and a directional layout. Its 316 mm outside diameter, 58 mm center hole diameter, and 12.9 mm lug hole diameter support the specified Subaru Impreza rear right application. The plain disc finish and zinc silver hat finish provide a functional, service-ready appearance.
For Subaru Impreza brake repair, this rotor offers the dimensional accuracy and surface design needed for a proper replacement. The 631-13017R part number identifies the correct rear right rotor configuration for the listed fitment.
What It Is Used For
- Replacing a worn or scored brake rotor.
- Addressing brake pulsation caused by rotor surface irregularities.
- Restoring braking performance after heat-related rotor wear.
- Correcting corrosion on the rotor hat or braking surface.
- Servicing a rear right brake rotor on the listed Subaru Impreza models.
Installation Notes and Tips
Verify rotor dimensions, bolt pattern, and position before installation. Clean the hub mounting surface thoroughly to help ensure proper rotor seating. Follow the vehicle manufacturer’s brake service procedures, including pad inspection and torque specifications, during installation.
Quality Assurance
Dynamic Friction supplies brake components for service replacement applications, and this rotor is built to the listed dimensional and finish specifications. Part number 631-13017R should be matched to the confirmed fitment before installation.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2007 | Subaru | Impreza | WRX STI | Rear Right | DFC Brake Rotor - Drilled and Slotted - Silver |
| 2006 | Subaru | Impreza | WRX STI | Rear Right | DFC Brake Rotor - Drilled and Slotted - Silver |
| 2005 | Subaru | Impreza | WRX STI | Rear Right | DFC Brake Rotor - Drilled and Slotted - Silver |
| No rows match your filter. | |||||