Dynamic Friction 633-26008L Disc Brake Rotor - Rear Left

Overview

The Dynamic Friction DFC Brake Rotor - Drilled and Slotted - Black, part number 633-26008L, is a rear left disc brake rotor built for Tesla Y performance applications with red calipers. It combines a slotted and drilled surface with a black zinc hat finish and rust-resistant coating for a clean, service-focused replacement.

Key Features

• Slotted X drilled rotor surface for consistent brake contact and heat management.
• Black zinc hat finish with rust-resistant coating for added corrosion protection.
• Directional brake surface for application-specific rotation.
• 335 mm outside diameter, 47.4 mm height, and 70.2 mm center hole diameter.
• 5-lug pattern with 114.3 mm bolt circle diameter and 16.5 mm bolt holes.

Detailed Description

Part number 633-26008L is a Dynamic Friction disc brake rotor engineered for the rear left position on Tesla Y models listed in the fitment data. The rotor uses a directional, slotted and drilled braking surface to support stable pad engagement, while the plain disc face and black hat finish provide a clean appearance behind the wheel. Its 20 mm discard thickness and 22 mm nominal thickness give you the dimensional reference needed for brake service planning.

This rotor is listed for 2020-2025 Tesla Y applications with red calipers, including Performance trims noted in the fitment data. If you are replacing a worn rear brake rotor on a Tesla Y, part number 633-26008L matches the specified rear left application and hardware geometry shown in the product data.

What It Helps Address

• Brake pulsation from a worn or uneven rotor surface.
• Reduced braking consistency caused by heat buildup.
• Corrosion on exposed rotor surfaces and hat areas.
• Rotor replacement needs during rear brake service.
• Fitment matching for Tesla Y rear left brake applications.

Installation Notes and Tips

Verify rotor dimensions, bolt pattern, and directional orientation before installation. This part is listed for the rear left position only, so confirm the vehicle side and caliper configuration against the fitment notes before ordering. Clean the hub mounting surface and inspect pads and related brake components during service.

Quality Assurance

Dynamic Friction supplies this rotor with a rust-resistant coating and black zinc hat finish for corrosion control. The part number 633-26008L is cataloged for the specified Tesla Y rear left applications shown in the fitment data.