Dynamic Friction 633-75061R Disc Brake Rotor - Rear Right

Overview

This Dynamic Friction disc brake rotor is built for rear right applications and uses a slotted, drilled surface with a black zinc hat finish. It is a fitment-specific replacement for hybrid and EV platforms across Lexus and Toyota, including Lexus NX350 and Toyota Sienna applications.

Part number 633-75061R is engineered with a directional braking surface, 317 mm outside diameter, and 5-lug / 5-bolt mounting pattern. The rust-resistant coating and black hat finish add corrosion protection for everyday road use.

Key Features

• Slotted and drilled rotor surface for consistent brake pad contact.
• Directional brake surface for application-specific airflow and wear pattern control.
• Rust-resistant coating with zinc black hat finish.
• 317 mm outside diameter with 44.5 mm height.
• 5-bolt, 5-lug pattern with 114.3 mm bolt circle diameter.

Detailed Description

The Dynamic Friction 633-75061R is a rear right disc brake rotor for select Lexus and Toyota vehicles, including Lexus NX350, Lexus NX350h, Lexus NX450h+, Toyota Crown, Toyota Sienna, and Toyota RAV4 Prime. It also covers related applications such as Lexus RZ300e, RZ450e, and Toyota bZ4X fitments.

As part of the DFC Brake Rotor - Drilled and Slotted - Black line, this rotor combines a plain disc finish with a slotted X drilled surface and a corrosion-resistant black hat. The directional design and specified discard thickness of 16.5 mm support proper replacement planning for the rear brake system. Part number 633-75061R is also referenced for the same application as a Monroe Shocks & Struts cross-reference in some catalogs.

Common Issues This Rotor Can Address

• Brake pulsation from a worn or uneven rotor surface.
• Reduced braking consistency caused by heat buildup.
• Corrosion on the rotor hat or mounting area.
• Noise from a rotor surface that no longer meets service limits.
• Fitment mismatch when replacing a rear right rotor on supported Lexus and Toyota models.

Installation Notes and Tips

Verify rear right fitment by year, model, and brake configuration before installation. Confirm rotor dimensions, bolt pattern, and center hole diameter against the removed part. Inspect pads, caliper hardware, and hub condition during service so the new rotor seats correctly.

Quality Assurance

Dynamic Friction supplies this rotor as a fitment-specific replacement with corrosion-resistant finishing and application-matched dimensions. The 633-75061R part number should be matched to the vehicle listing before installation.