Dynamic Friction 830-03069R Disc Brake Rotor - Front Right

Overview

The Dynamic Friction DFC Geoperformance Rotor - Drilled and Slotted, part number 830-03069R, is a vented disc brake rotor built for front right applications with a directional slotted and drilled surface. It is engineered for vehicles that need consistent braking performance and corrosion resistance in everyday driving.

Compatible With Hyundai Elantra, Hyundai Kona, Kia K4, and Kia Niro front right applications, this rotor uses a 280 mm outside diameter, 114.3 mm bolt circle, and 5-lug mounting pattern. The Geospec silver gray hat finish and rust-resistant coating add protection against surface corrosion, while the plain disc finish keeps the braking surface focused on function.

Key Features

• DFC Geoperformance Rotor - Drilled and Slotted design for controlled brake surface engagement
• Vented rotor construction for improved heat management
• Directional slotted and drilled surface for consistent pad contact
• Rust-resistant coating with Geospec silver gray hat finish
• 5-lug pattern with 114.3 mm bolt circle and 69 mm center hole

Detailed Description

Part number 830-03069R is a Dynamic Friction disc brake rotor from the DFC Geoperformance Rotor - Drilled and Slotted line. The directional surface pattern is paired with a vented rotor design to support stable braking characteristics under repeated stops, while the coated hat helps reduce visible corrosion on exposed areas. This rotor is a fitment-specific replacement for front right brake service on Hyundai Elantra, Hyundai Kona, Kia K4, and Kia Niro applications listed below.

The rotor measures 280 mm in outside diameter with 25 mm nominal thickness and 23 mm discard thickness. Its 5-bolt, 114.3 mm bolt circle layout and 12.5 mm bolt hole diameter match the specified applications, making it a direct service part for the listed vehicles. If you are replacing a worn or heat-affected rotor on a Hyundai Elantra or Kia Niro, part number 830-03069R provides the correct fitment profile for the front right position.

What It Helps Address

• Brake pulsation from a worn or uneven rotor surface
• Reduced braking consistency during repeated stops
• Surface corrosion on exposed rotor areas
• Noise or vibration caused by rotor wear
• Fitment issues when replacing the specified front right rotor

Installation Notes

Install only on the listed front right applications. Verify rotor dimensions, bolt pattern, and center hole diameter before installation. The directional surface must be oriented correctly during service, and the brake system should be inspected for pad wear, caliper condition, and hub cleanliness at the same time. Part number 830-03069R is listed for Hyundai Elantra, Hyundai Kona, Kia K4, and Kia Niro applications with the notes shown in the fitment table.

Quality Assurance

Dynamic Friction’s DFC Geoperformance Rotor line combines a drilled and slotted braking surface with corrosion-resistant finishing for service-focused replacement use. Part number 830-03069R is built to match the specified fitment and dimensional requirements for the listed applications.