/live/media/DF/DF_83054261R_Fro.jpg)
Dynamic Friction 830-54261R Disc Brake Rotor - Front Right
| Brand | Dynamic Friction 830-54261R |
|---|---|
| Position | Front Right |
| Discard Thickness | 23 |
| Nominal Thickness | 25 |
| Bolt Hole Diameter | 13.7 |
| Disc Finish | Plain |
| Hat Finish | Geospec silver grey |
| Rust Resistant Coating | Yes |
| Bolt Hole Quantity | 5 |
| Outside Diameter | 350 |
| Height | 49.4 |
| Surface Type | Slotted x drilled |
| Solid Or Vented Type Rotor | Vented |
| Center Hole Diameter | 63.5 |
| Stud/Lug Hole Quantity | 5 |
| Directional or Non-Directional Brake Surface | Directional |
| Bolt Circle Diameter | 108 |
| Product line | DFC Geoperformance Rotor - Drilled and Slotted |
| Fits | Ford · 3 vehicles |
Drilled and slotted surface. Helps shed heat and maintain consistent braking feel.
Vented rotor design. Promotes airflow to help manage brake temperatures.
Rust-resistant coating. Adds corrosion protection for longer-lasting appearance.
Front Right Drilled and Slotted Rotor
The Dynamic Friction DFC Geoperformance Rotor - Drilled and Slotted is a vented disc brake rotor built for the front right position on select Ford Focus models. Part number 830-54261R features a 350 mm outside diameter, 25 mm nominal thickness, and a directional slotted X drilled surface for consistent brake contact.
Finished with Geospec Silver Grey on the hat and a rust resistant coating, this rotor is made for drivers replacing a worn front right brake rotor on a 2016-2018 Ford Focus. The plain disc finish and vented construction support stable braking performance in everyday street use.
Key Features
- Part number 830-54261R
- Fits 2016-2018 Ford Focus, front right
- Drilled and slotted rotor surface
- Vented disc brake rotor design
- 350 mm outside diameter
- 25 mm nominal thickness and 23 mm discard thickness
- 5-bolt, 5-lug pattern with 108 mm bolt circle diameter
- 63.5 mm center hole diameter and 13.7 mm bolt hole diameter
- Geospec Silver Grey hat finish with rust resistant coating
- Directional brake surface
Product Details
Part number 830-54261R is part of the Dynamic Friction DFC Geoperformance Rotor - Drilled and Slotted line, a rotor family focused on drilled and slotted braking surfaces and corrosion-resistant finishing. This front right rotor is engineered with a vented core, plain disc finish, and directional slot-and-drill pattern to match the specified application on the Ford Focus. If you are searching for a front right brake rotor for 2016, 2017, or 2018 Ford Focus models, 830-54261R provides the listed dimensions and mounting layout for that fitment.
Common Problems This Rotor Can Address
- Worn or below-spec front right brake rotor thickness
- Brake pulsation caused by rotor surface wear
- Corrosion on the rotor hat or braking surface
- Reduced braking consistency from an uneven rotor face
- Replacement needs for a damaged 5-lug front rotor
Installation Notes and Tips
Verify rotor dimensions, bolt circle diameter, center hole diameter, and position before installation. This rotor is listed for the front right side only on 2016-2018 Ford Focus models, so confirm side-specific fitment before ordering. Inspect pads, caliper condition, and hub surface during replacement to help ensure proper rotor seating and even braking contact.
Quality Assurance
Dynamic Friction identifies this rotor with a rust resistant coating and Geospec Silver Grey hat finish for added surface protection. Part number 830-54261R is built to the published specifications for the listed Ford Focus application.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2018 | Ford | Focus | RS | Front Right | DFC Geoperformance Rotor - Drilled and Slotted |
| 2017 | Ford | Focus | RS | Front Right | DFC Geoperformance Rotor - Drilled and Slotted |
| 2016 | Ford | Focus | RS | Front Right | DFC Geoperformance Rotor - Drilled and Slotted |
| No rows match your filter. | |||||