/live/media/DF/DF_83059033L_Generic.jpg)
Dynamic Friction 830-59033L Disc Brake Rotor - Rear Left
| Brand | Dynamic Friction 830-59033L |
|---|---|
| Position | Rear Left |
| Discard Thickness | 8 |
| Nominal Thickness | 9 |
| Bolt Hole Diameter | 12.6 |
| Disc Finish | Plain |
| Hat Finish | Geospec silver grey |
| Rust Resistant Coating | Yes |
| Bolt Hole Quantity | 5 |
| Overall Height | 60.5 |
| Outside Diameter | 305 |
| Height | 60.5 |
| Surface Type | Slotted x drilled |
| Solid Or Vented Type Rotor | Solid |
| Center Hole Diameter | 64.1 |
| Stud/Lug Hole Quantity | 5 |
| Stud/Lug Hole Diameter | 12.6 |
| Directional or Non-Directional Brake Surface | Directional |
| Bolt Circle Diameter | 114.3 |
| Stud/Lug Hole Circle Diameter | 114.3 |
| Product line | DFC Geoperformance Rotor - Drilled and Slotted |
| Fits | Honda · 6 vehicles |
Drilled and slotted. Directional braking surface helps maintain consistent pad contact.
Rust-resistant coating. Helps protect exposed rotor surfaces during service life.
Geospec finish. Silver gray hat coating adds a clean, corrosion-conscious look.
Overview
The Dynamic Friction DFC Geoperformance Rotor - Drilled and Slotted disc brake rotor is built for drivers who need a direct-fit replacement with a performance-oriented surface design. It is identified by part number 830-59033L and features a directional slotted and drilled braking surface with a rust-resistant coating.
Key Features
- Slotted X drilled surface for consistent brake contact and heat management.
- Rust-resistant coating helps protect exposed surfaces.
- Solid rotor construction with a plain disc finish.
- Geospec Silver Grey hat finish for a clean, corrosion-conscious appearance.
- 5-lug pattern with 114.3 mm bolt circle and 64.1 mm center hole.
Product Details
This Dynamic Friction rotor is engineered around the specifications listed for the application, including 305 mm outside diameter, 60.5 mm overall height, 9 mm nominal thickness, and 8 mm discard thickness. The directional braking surface is intended for controlled pad engagement and repeatable braking feel. For shoppers comparing brake rotor options for Honda Crosstour or Honda Accord Crosstour service, part number 830-59033L provides a fitment-specific replacement for the rear left position.
Common Issues It May Address
- Brake pulsation caused by worn rotor surfaces.
- Reduced braking consistency from heat-affected rotors.
- Surface corrosion on an aging brake rotor.
- Uneven pad contact on a damaged braking surface.
Installation Notes
Fits 2012-2015 Honda Crosstour, rear left. Fits 2010-2011 Honda Accord Crosstour, rear left. Verify rotor dimensions, bolt pattern, and position before installation. Match the rotor to the vehicle’s rear left application and confirm clearance with the brake assembly.
Quality Assurance
Dynamic Friction’s Geoperformance Rotor line combines a performance-style drilled and slotted surface with corrosion-resistant finishing for a service-ready replacement. Part number 830-59033L is built to the listed specifications for the confirmed applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2015 | Honda | Crosstour | Rear Left | DFC Geoperformance Rotor - Drilled and Slotted |
| 2014 | Honda | Crosstour | Rear Left | DFC Geoperformance Rotor - Drilled and Slotted |
| 2013 | Honda | Crosstour | Rear Left | DFC Geoperformance Rotor - Drilled and Slotted |
| 2012 | Honda | Crosstour | Rear Left | DFC Geoperformance Rotor - Drilled and Slotted |
| 2011 | Honda | Accord Crosstour | Rear Left | DFC Geoperformance Rotor - Drilled and Slotted |
| 2010 | Honda | Accord Crosstour | Rear Left | DFC Geoperformance Rotor - Drilled and Slotted |
| No rows match your filter. | ||||