Dynamite Friction 350-03182 Brake Hydraulic Hose - Rear Left

Rear Left Brake Hydraulic Hose for Kia Niro and Hyundai Ioniq

Dynamite Friction DFC Brake Hose 350-03182 is a DOT approved rear left brake hydraulic hose built for specific Kia and Hyundai applications. It uses an EPDM outer sleeve, includes the bracket and gasket/seal, and is configured with a female end and a banjo fitting for the correct rear brake connection.

Key Features

• DOT approved brake hydraulic hose
• EPDM outer sleeve material for brake system use
• Includes 1 bracket
• Includes gasket or seal
• Female end 1 with M10-1.00 thread size
• Banjo end 2 fitting with 10.0 inside diameter
• Overall length: 376
• Rear left position application

Product Details

The DFC Brake Hose line from Dynamite Friction focuses on direct-fit hydraulic hose replacement for brake service. Part number 350-03182 is specified for the rear left position on 2017-2022 Kia Niro and 2020 Hyundai Ioniq, with an additional 2018-2019 Hyundai Ioniq application noted for the rear left side with a 38mm rear caliper piston. This part number, 350-03182, is built around the listed hose dimensions and fitting style to match the original brake routing and connection points on these vehicles.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What It Helps Address

• Brake fluid seepage at a damaged rear hose
• Cracked or weathered hose outer material
• Soft or inconsistent brake pedal feel caused by hose deterioration
• Corrosion or wear at the hose connection points
• Service replacement for rear left brake line damage on Kia Niro and Hyundai Ioniq models

Installation Notes and Tips

Verify rear left fitment before installation on 2017-2022 Kia Niro and 2020 Hyundai Ioniq models. Confirm the female M10-1.00 connection, banjo fitting, overall length, and bracket location against the original hose. Replace the gasket or seal during service and inspect the surrounding brake components for leaks, abrasion, or corrosion before bleeding the system.

Quality Assurance

This brake hose is DOT approved and built with an EPDM outer sleeve for brake system service. It includes the bracket and gasket/seal listed in the product data.