Dynamite Friction 4512-47091 Disc Brake Kit - Rear

Rear Brake Kit for Select Buick, Cadillac, and Chevrolet

The DFC GEOSPEC Coated Rotors with 5000 Advanced Brake Pads - Ceramic and Hardware kit is a rear disc brake service kit built for OE-style fitment and consistent stopping performance. Part number 4512-47091 combines coated rotors, ceramic pads, and matching hardware for select rear brake applications on Buick Cascada, Buick Verano, Cadillac ELR, Chevrolet Cruze, and Chevrolet Volt.

• Rear disc brake kit with coated rotors, ceramic pads, and hardware
• DFC GEOSPEC coated rotors with dry-to-install finish and rust-resistant silver-gray coating
• 5000 Advanced ceramic brake pads with post-cured friction material
• Premium rubber-steel-rubber shims for improved noise, vibration, and harshness control
• OE-style rotor machining with non-directional finish for smoother bed-in
• Part number 4512-47091 for rear brake service applications

Product Line Details

DFC GEOSPEC rotors are coated to resist corrosion and arrive dry, so there is no oil film to remove before installation. The rotor castings are made to G3000/G11H18 cast iron specifications, then machined to tight tolerances and inspected for balance and critical dimensions. The 5000 Advanced pads are post cured, scorched to reduce initial break-in, and assembled with rubber-steel-rubber shims to help reduce brake noise and vibration. The included hardware is built with PTFE coating, vulcanized rubber, and stainless steel for OE-style form and fit.

Fitment

• Fits 2016-2019 Buick Cascada, rear.
• Fits 2012-2017 Buick Verano, rear.
• Fits 2014-2016 Cadillac ELR, rear. Fitment is for vehicles without Performance Brakes.
• Fits 2014-2015 Chevrolet Cruze, rear. Notes: 2LT; 300mm Front Rotors.
• Fits 2011-2015 Chevrolet Volt, rear.

Common Issues This Kit Addresses

• Rear brake noise from worn pads or fatigued hardware
• Uneven rear pad wear caused by corroded or weakened hardware
• Reduced braking consistency from worn rotor surfaces
• Longer stopping distances due to aged rear brake components
• Rust buildup on exposed rotor surfaces

Installation Notes

Inspect calipers, slides, and parking brake components before installation. Clean the hub mounting surface, verify rotor runout, and follow the vehicle manufacturer’s torque specifications during assembly. The coated rotors are processed dry and are ready to install without additional preparation. Part number 4512-47091 is intended for rear brake service on the listed applications only.

Quality Assurance

DFC GEOSPEC rotors are 100% inspected after machining, including balance checks on vented rotors, and each rotor is covered by a 12-month warranty against defects in material and workmanship. The brake pads are post cured and scorched for stable friction performance, while the hardware kit uses corrosion-resistant materials selected for OE-style durability.