Dynamite Friction 600-03033 Disc Brake Rotor - Rear

Rear Brake Rotor for Genesis Coupe

The Dynamite Friction DFC Brake Rotor 600-03033 is a rear solid disc brake rotor built for 2010-2016 Hyundai Genesis Coupe applications with Mando Brakes 1-piston calipers. It is sized for direct rear brake service on the Hyundai Genesis Coupe and supports consistent rotor replacement when the original rear rotor is worn or below specification.

Key Features

• Rear disc brake rotor for 2010-2016 Hyundai Genesis Coupe
• DFC Brake Rotor product line from Dynamite Friction
• Solid rotor design
• Outside diameter: 314 mm
• Nominal thickness: 13 mm
• Discard thickness: 11.4 mm
• Height: 60.6 mm
• Inside diameter: 69 mm
• 5-bolt hole pattern with 12.5 mm bolt hole diameter

Detailed Description

Part number 600-03033 is a rear brake rotor engineered for the Hyundai Genesis Coupe platform from 2010 through 2016. The DFC Brake Rotor line focuses on replacement rotors with application-specific dimensions, and this rotor matches the listed rear fitment for Genesis Coupe models equipped with Mando Brakes 1-piston calipers. With a 314 mm outside diameter and solid construction, it is specified for rear brake service where correct thickness and mounting dimensions are critical. If you are sourcing a rear brake rotor for Hyundai Genesis Coupe 2010-2016 models, 600-03033 provides the listed dimensional match for that application.

What It Is Used For

• Replacing a worn rear rotor on a 2010-2016 Hyundai Genesis Coupe
• Correcting brake pulsation caused by rotor wear or thickness variation
• Restoring rear braking surface after scoring or heat-related damage
• Addressing rotor replacement needs during rear brake service
• Maintaining proper rear rotor dimensions for Mando Brakes 1-piston caliper setups

Installation Notes and Tips

Verify rear fitment against the vehicle’s brake configuration before installation. This rotor is listed for 2010-2016 Hyundai Genesis Coupe rear applications with Mando Brakes 1-piston calipers, so confirm the caliper type and rotor dimensions match the existing setup. Inspect pads, caliper hardware, and hub condition during service, and measure the rotor before reuse decisions are made. Part number 600-03033 should be matched to the rear axle position only.

Quality Assurance

The DFC Brake Rotor line from Dynamite Friction is built around application-specific brake replacement parts. This rotor is identified by part number 600-03033 and listed with defined dimensional specifications for the rear Hyundai Genesis Coupe application.