Dynamite Friction 600-16007 Disc Brake Rotor - Rear

Reliable Performance with Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor 600-16007 offers consistent braking performance designed for vehicles requiring a solid disc brake rotor. Engineered with precise dimensions, this rotor supports safe and effective stopping power for compatible makes and models.

• Solid disc brake rotor design for durability
• Nominal thickness of 10 mm with a discard thickness of 9 mm
• Outside diameter measures 252 mm for proper fitment
• Five bolt holes with a 13 mm diameter each
• Inside diameter of 59 mm and rotor height of 50.5 mm

About the DFC Brake Rotor Product Line

The DFC Brake Rotor line by Dynamite Friction focuses on delivering dependable rotors with precise manufacturing tolerances. This product line emphasizes solid rotors that maintain structural integrity under typical driving conditions. The 600-16007 rotor is part of this line, offering a solid rotor option suitable for vehicles requiring a 5-bolt pattern and specific dimensional requirements.

Technical Details and Specifications

This disc brake rotor features a solid design, which means it does not have ventilation channels. The nominal thickness is 10 mm, with a discard thickness of 9 mm, indicating when the rotor should be replaced to maintain braking efficiency. The rotor’s outside diameter is 252 mm, and it has a height of 50.5 mm, ensuring compatibility with brake calipers designed for these dimensions. The bolt hole diameter is 13 mm, and there are five bolt holes arranged to fit specific vehicle hubs. The inside diameter measures 59 mm, which is critical for proper mounting and alignment.

Common Applications and Problem Solving

• Replacement for worn or warped rotors causing brake pulsation
• Addressing rotor thickness below manufacturer specifications
• Resolving uneven brake pad wear due to rotor surface issues
• Improving braking stability on vehicles with compatible 5-bolt hubs
• Maintaining safe stopping distances by ensuring rotor integrity

Installation Notes and Tips

Ensure the rotor thickness is measured before installation to confirm it meets the minimum discard thickness of 9 mm. Clean the rotor surface to remove any protective coatings or debris before mounting. Verify the bolt hole pattern and diameter match the vehicle hub specifications. Proper torque settings should be applied to the bolts to avoid rotor warping. It is recommended to inspect brake pads and calipers during rotor replacement for optimal braking performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor 600-16007 to meet industry standards for durability and performance. While specific warranty details are not provided, the product is designed to comply with OEM specifications for solid disc brake rotors. Users should follow maintenance guidelines and replace the rotor once the discard thickness is reached to ensure continued safety and reliability.