Dynamite Friction 600-27010 Disc Brake Rotor - Front

Reliable Disc Brake Rotor for Volvo 740, 745, and 760 Models

The Dynamite Friction DFC Brake Rotor 600-27010 is engineered to meet the braking demands of Volvo 740, 745, and 760 vehicles. Designed as a vented disc brake rotor, it offers consistent performance and heat dissipation for improved braking efficiency.

• Nominal thickness: 22 mm
• Discard thickness: 20 mm
• Outside diameter: 262 mm
• Inside diameter: 65 mm
• Bolt hole quantity: 5
• Bolt hole diameter: 12x1.5 mm
• Rotor height: 72 mm
• Vented rotor design for enhanced cooling

About the DFC Brake Rotor Product Line

The DFC Brake Rotor line by Dynamite Friction focuses on delivering rotors that balance durability and thermal management. This vented rotor design helps reduce heat buildup during braking, which is critical for maintaining consistent stopping power and rotor longevity in Volvo 740, 745, and 760 models. The 600-27010 part number represents a rotor engineered to precise specifications for these vehicles.

Technical Details and Specifications

This disc brake rotor features a nominal thickness of 22 mm with a discard thickness of 20 mm, indicating when replacement is necessary to maintain safe braking performance. The rotor's 262 mm outside diameter and 65 mm inside diameter ensure proper fitment and compatibility with the specified Volvo models. The 5 bolt holes with a 12x1.5 mm diameter secure the rotor firmly to the hub, while the 72 mm height accommodates the caliper assembly. The vented design improves airflow, helping to dissipate heat generated during braking and reducing the risk of brake fade.

Applications and Problem Solving

• Replacement for worn or warped rotors on Volvo 740, 745, and 760
• Improves heat dissipation to prevent brake fade during extended use
• Restores braking performance compromised by rotor thickness below discard limits
• Addresses vibration or noise caused by uneven rotor surfaces
• Ensures proper fitment with exact bolt hole pattern and dimensions

Installation Notes and Tips

Ensure the rotor surface and hub mounting area are clean and free of debris before installation. Verify the bolt hole pattern and diameter match the vehicle specifications. Measure rotor thickness to confirm it meets or exceeds the nominal thickness of 22 mm. Use proper torque specifications for the 5 mounting bolts to avoid rotor warping. It is recommended to inspect brake pads and replace if worn to maintain optimal braking performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor 600-27010 to meet industry standards for durability and performance. While specific warranty details are not provided, the rotor is designed to comply with OEM fitment and quality requirements for Volvo 740, 745, and 760 models, ensuring reliable braking under normal operating conditions.