Dynamite Friction 600-28003 Disc Brake Rotor - Front

Reliable Performance with Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor 600-28003 offers precise engineering for disc brake systems requiring vented rotors. Designed to meet specific thickness and diameter specifications, this rotor supports consistent braking performance and heat dissipation.

• Nominal thickness of 20.4 mm ensures durability and proper rotor life
• Discard thickness set at 18.5 mm for safe replacement intervals
• Vented rotor design improves heat dissipation during braking
• Outside diameter of 266 mm and inside diameter of 66 mm for accurate fitment
• Four bolt holes with 13 mm diameter for secure mounting
• Height of 27.3 mm to match OEM specifications

Detailed Specifications and Product Line Information

The DFC Brake Rotor line by Dynamite Friction focuses on delivering rotors engineered for reliable braking performance and longevity. The 600-28003 part number features a vented disc design that helps reduce heat buildup, which is critical for maintaining braking efficiency under demanding conditions. With a nominal thickness of 20.4 mm and a discard thickness of 18.5 mm, this rotor provides clear guidelines for maintenance and replacement, ensuring safety and performance. The rotor’s dimensions, including a 266 mm outside diameter and 66 mm inside diameter, along with four bolt holes sized at 13 mm, are designed to fit specific vehicle applications requiring these measurements.

Applications and Common Issues Addressed

• Replacement for worn or warped rotors causing brake pulsation
• Upgrading to vented rotors for improved heat management
• Restoring braking performance on vehicles with reduced rotor thickness
• Addressing noise and vibration issues related to rotor wear
• Ensuring proper fitment for vehicles requiring 4-bolt, 266 mm diameter rotors

Installation Notes and Tips

When installing the Dynamite Friction DFC Brake Rotor 600-28003, ensure the rotor surface is clean and free of any contaminants before mounting. Verify that the bolt hole pattern and diameter match the vehicle’s hub assembly. It is recommended to measure the rotor thickness before installation to confirm it meets the nominal thickness of 20.4 mm and to replace the rotor if it is at or below the discard thickness of 18.5 mm. Proper torque specifications should be followed for the 13 mm bolt holes to secure the rotor safely.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor line with quality control standards to meet industry requirements. While specific warranty details for part number 600-28003 are not provided, Dynamite Friction products typically adhere to manufacturer guidelines for durability and performance. Users should consult vehicle and rotor manufacturer recommendations for maintenance and replacement intervals.