Dynamic Friction 600-40042 Disc Brake Rotor - Front

DFC Brake Rotor for Sprinter Front Brakes

The Dynamic Friction DFC Brake Rotor, part number 600-40042, is a vented front disc brake rotor built for select Dodge Sprinter applications. It is sized for 285 mm front rotor setups and is listed for 2003-2006 Dodge Sprinter 2500 and 2003-2006 Dodge Sprinter 3500 front brake positions.

The DFC Brake Rotor line focuses on direct-fit replacement rotors for everyday braking service. This rotor uses a vented design with a 284.5 mm outside diameter, 72.2 mm height, 85 mm inside diameter, 5-bolt pattern, and 15 mm bolt hole diameter. Nominal thickness is 22 mm, with discard thickness at 19 mm.

Key Features

• Part number 600-40042 for front brake service
• Vented disc brake rotor construction
• 285 mm front rotor application
• Outside diameter: 284.5 mm
• Nominal thickness: 22 mm
• Discard thickness: 19 mm
• Height: 72.2 mm
• Inside diameter: 85 mm
• 5-bolt hole design with 15 mm bolt hole diameter

Detailed Description

Use this DFC Brake Rotor when replacing the front rotor on a Dodge Sprinter 2500 or Dodge Sprinter 3500 with the listed 285 mm front brake setup. The vented rotor design helps manage heat during repeated braking, while the dimensional specifications support proper rotor-to-hub and rotor-to-caliper fitment on the confirmed applications. If you are searching for a front brake rotor for a 2003-2006 Dodge Sprinter 2500 or a 2003-2006 Dodge Sprinter 3500, part number 600-40042 is the direct reference to verify.

This part cross-references no listed alternate part numbers in the provided data.

What It Helps Address

• Front rotor wear that has reached discard thickness
• Brake pulsation caused by rotor surface variation
• Reduced braking consistency from heat buildup
• Noise or vibration associated with worn front rotors
• Service replacement for 285 mm front brake setups on Dodge Sprinter models

Installation Notes and Tips

Confirm the vehicle uses the listed 285 mm front rotor configuration before ordering. Fitment notes vary by brake sensor style and caliper setup, including clip style brake pad sensors, pin style brake pad sensors, Bosch calipers, and Wabco front with ATE rear calipers on certain applications. Verify rotor dimensions, bolt pattern, and front axle application against the existing part and vehicle build data before installation. Part number 600-40042 should be matched to the confirmed front position only.

Quality Assurance

Dynamic Friction DFC Brake Rotor components are cataloged with detailed dimensional specifications to support accurate replacement selection for the listed Dodge Sprinter front brake applications. Always confirm the rotor measurements and fitment notes against the vehicle before service.