Dynamite Friction 600-40061 Disc Brake Rotor - Front

Dynamite Friction DFC Brake Rotor for Dodge Front Brakes

The Dynamite Friction DFC Brake Rotor, part number 600-40061, is a vented front disc brake rotor built for select Dodge trucks and vans from 1985-1997. With a 299 mm outside diameter, 31.6 mm nominal thickness, and 30 mm discard thickness, it supports consistent braking performance for vehicles that use a 5-lug front rotor setup.

The DFC Brake Rotor line from Dynamite Friction focuses on direct-fit replacement rotors for common service applications. This rotor is specified for front axle use on Dodge B150, B1500, B250, D100, D150, and Ramcharger models, including applications with 10-inch rear drums or 11-inch rear drum configurations noted in the fitment data.

• Part number 600-40061 for front brake service
• Vented rotor design for heat management during braking
• 299 mm outside diameter with 126.7 mm height
• 31.6 mm nominal thickness and 30 mm discard thickness
• 5-bolt pattern with 1/2-20 bolt hole diameter
• Inside diameter: 89.4 mm
• Fits select Dodge B150, B1500, B250, D100, D150, and Ramcharger front applications

Detailed Product Overview

This front brake rotor is engineered for Dodge applications that require a vented disc rotor with the listed dimensions and bolt pattern. It is a practical replacement choice for maintaining rotor thickness within service limits on older Dodge platforms, including 1985-1993 Dodge Ramcharger front brake service and 1988-1989 Dodge D100 front brake service. The part number 600-40061 should be matched to the vehicle’s front brake specifications before installation.

Fits 1995-1997 Dodge B1500, front. Fits 1990-1994 Dodge B150, front. Fits 1994 Dodge B250, front. Fits 1990-1993 Dodge B250, front. Fits 1988-1993 Dodge D150, front. Fits 1985-1993 Dodge Ramcharger, front. Fits 1985-1989 Dodge B150, front. Fits 1985-1989 Dodge B250, front. Fits 1988-1989 Dodge D100, front. Fits 1985-1987 Dodge D100, front. Fits 1985-1987 Dodge D150, front.

Common Brake Issues This Rotor Can Address

• Rotor wear that has reached or exceeded discard thickness
• Brake pulsation caused by uneven rotor surfaces
• Reduced braking consistency from heat buildup in front brakes
• Service replacement for worn front rotors on Dodge B150, B250, D100, D150, and Ramcharger models
• Front brake maintenance on vehicles with 5-lug wheel configurations

Installation Notes and Tips

Verify rotor dimensions, bolt pattern, and front axle fitment against the existing brake setup before installation. Confirm whether the vehicle uses the rear drum or rear disc configuration noted in the fitment data, especially on 1985-1989 Dodge B150 and B250, and 1985-1987 Dodge D100 and D150 applications. Inspect pads, calipers, and hub surfaces during rotor replacement to help ensure proper brake operation.

Quality Assurance

Dynamite Friction DFC Brake Rotor components are built to meet the dimensional requirements listed for the application. Use the published specifications and fitment data for confirmation before ordering or installation.