Dynamite Friction 600-40109 Disc Brake Rotor - Rear

Overview of Dynamite Friction DFC Brake Rotor 600-40109

The Dynamite Friction DFC Brake Rotor 600-40109 is engineered for reliable braking performance on select Chrysler, Dodge, Ram, and Volkswagen vehicles. Designed as a solid disc brake rotor, it meets specific dimensional requirements to ensure proper fit and function on models like the Grand Caravan, Journey, Routan, Town & Country, and C/V.

• Part Number: 600-40109
• Brand Line: DFC Brake Rotor
• Solid disc brake rotor design
• Outside diameter: 305 mm
• Inside diameter: 72.5 mm
• Nominal thickness: 11.8 mm
• Discard thickness: 10.4 mm
• Height: 33.4 mm
• Bolt hole quantity: 5
• Bolt hole diameter: 14 mm

Detailed Specifications and Features

This DFC Brake Rotor from Dynamite Friction is a solid rotor type, providing consistent braking without the complexity of vented designs. The rotor measures 305 mm in outside diameter and 72.5 mm inside diameter, with a nominal thickness of 11.8 mm and a discard thickness of 10.4 mm, indicating when replacement is necessary to maintain safe braking performance. The rotor height is 33.4 mm, and it features five bolt holes with a diameter of 14 mm, ensuring compatibility with the specified vehicle models.

The DFC Brake Rotor line is designed to meet the demands of daily driving and moderate load conditions, offering a balance of durability and performance. This rotor is suitable for vehicles requiring a solid rotor design rather than vented, which can be beneficial in certain applications where heat dissipation requirements are moderate.

Compatible Vehicles and Applications

• Chrysler Grand Caravan
• Dodge Journey
• Ram C/V
• Volkswagen Routan
• Chrysler Town & Country

This rotor is intended for use in disc brake systems on these models, addressing common braking issues such as rotor wear, vibration, and noise.

Common Issues Addressed by This Rotor

• Excessive rotor wear or thinning below discard thickness
• Brake pulsation caused by uneven rotor surface
• Noise or squealing due to rotor surface damage
• Reduced braking efficiency from warped rotors
• Compatibility with 5-bolt wheel hubs requiring 14 mm bolt holes

Installation Notes and Tips

When installing the Dynamite Friction DFC Brake Rotor 600-40109, ensure the rotor thickness is measured to confirm it meets or exceeds the nominal thickness of 11.8 mm. Replace the rotor if thickness is below the discard thickness of 10.4 mm. Properly torque the five 14 mm bolt holes to manufacturer specifications to avoid rotor warping. It is recommended to inspect brake pads and hardware during installation for optimal braking performance.

Quality Assurance and Warranty

Dynamite Friction's DFC Brake Rotor line adheres to industry standards for material quality and dimensional accuracy. While specific warranty details for part number 600-40109 should be confirmed with the supplier, Dynamite Friction products typically come with a limited warranty against manufacturing defects. This rotor is manufactured to provide consistent performance and durability for the compatible Chrysler, Dodge, Ram, and Volkswagen models listed.