Dynamite Friction 600-40112 Disc Brake Rotor - Front

Front Vented Brake Rotor for Chrysler, Dodge, Ram, and Volkswagen

The Dynamite Friction DFC Brake Rotor 600-40112 is a front disc brake rotor built for vehicles that use a vented rotor design and a 5-bolt pattern. With a 330 mm outside diameter, 28 mm nominal thickness, and 26.4 mm discard thickness, it matches the dimensional requirements for listed Chrysler, Dodge, Ram, and Volkswagen front brake applications.

Use this rotor when you need a direct-fit front brake rotor for Chrysler Pacifica, Chrysler Voyager, Dodge Journey, Dodge Grand Caravan, Chrysler Town & Country, Ram C/V, and Volkswagen Routan applications. The DFC Brake Rotor line focuses on application-specific fitment, and part number 600-40112 is sized for front axle service where vented rotor construction is required.

Key Features

• Part number 600-40112 from Dynamite Friction
• DFC Brake Rotor line front disc brake rotor
• Vented rotor construction for front brake use
• 330 mm outside diameter with 38 mm height
• 5-bolt hole design with 14.5 mm bolt hole diameter
• 72.5 mm inside diameter
• 28 mm nominal thickness and 26.4 mm discard thickness

Detailed Description

The Dynamite Friction 600-40112 is a vented front brake rotor engineered around the listed OE-style dimensions for specific Chrysler, Dodge, Ram, and Volkswagen platforms. It is a practical replacement choice for front brake service on 2017-2026 Chrysler Pacifica, 2020-2026 Chrysler Voyager, 2021-2026 Chrysler Grand Caravan, 2017-2020 Dodge Grand Caravan, 2012-2020 Dodge Journey, 2012-2016 Chrysler Town & Country, 2012-2015 Ram C/V, and 2012-2014 Volkswagen Routan. This rotor also fits 2012-2016 Chrysler Town & Country and 2012-2016 Dodge Grand Caravan applications with dual piston front calipers.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What It Helps Address

• Front brake pulsation caused by worn rotor surfaces
• Brake noise related to rotor wear or uneven contact
• Reduced braking consistency from rotor thickness loss
• Service replacement needs for vented front rotor applications
• Fitment issues when replacing a rotor with incorrect diameter or bolt pattern

Installation Notes and Tips

Confirm rotor dimensions, bolt pattern, and hub fitment before installation. This rotor is for front position use only and should be matched to the vehicle’s brake configuration, including dual piston front caliper applications where noted. Inspect pads, calipers, and hub surfaces during brake service to help ensure even rotor contact and proper braking performance.

Quality Assurance

Dynamite Friction DFC Brake Rotor 600-40112 is built to the listed dimensional specifications for the confirmed vehicle applications. Verify year, make, model, and front brake configuration against the fitment data before ordering.