Dynamite Friction 600-44000 Disc Brake Rotor - Front or Rear

Reliable Disc Brake Rotor for Hummer H1 Vehicles

The Dynamite Friction DFC Brake Rotor 600-44000 is engineered to meet the braking demands of the Hummer H1. Designed as a vented disc brake rotor, it offers consistent performance and durability for this specific vehicle model.

• Compatible with Hummer H1 models
• Part number 600-44000 for precise identification
• Vented rotor design for improved heat dissipation
• Nominal thickness of 22 mm and discard thickness of 20.7 mm
• Outside diameter of 266 mm and inside diameter of 90.1 mm
• Six bolt holes with a diameter of 10.6 mm
• Rotor height of 34.6 mm

About the DFC Brake Rotor Product Line

The DFC Brake Rotor line by Dynamite Friction focuses on delivering rotors that balance performance and reliability. This product line includes vented rotors like the 600-44000, which are designed to reduce heat buildup during braking, helping maintain consistent stopping power and rotor longevity. The DFC Brake Rotor series is tailored to meet the specifications required by vehicles such as the Hummer H1.

Technical Specifications and Features

This disc brake rotor features a vented design, which enhances airflow and cooling during braking cycles. The rotor has a nominal thickness of 22 mm, with a discard thickness set at 20.7 mm, indicating when replacement is necessary to maintain safe braking performance. The rotor’s outside diameter measures 266 mm, while the inside diameter is 90.1 mm, ensuring proper fitment on the Hummer H1. It includes six bolt holes, each with a diameter of 10.6 mm, and a rotor height of 34.6 mm, all critical dimensions for correct installation and operation.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Hummer H1 vehicles
• Improves heat dissipation to reduce brake fade during heavy use
• Restores braking performance affected by rotor thickness below discard limits
• Addresses vibration or pulsation issues caused by uneven rotor surfaces
• Ensures compatibility with factory bolt pattern and rotor dimensions

Installation Notes and Tips

When installing the Dynamite Friction DFC Brake Rotor 600-44000, ensure the rotor thickness is measured to confirm it meets or exceeds the nominal thickness of 22 mm. Replace the rotor if thickness is at or below the discard thickness of 20.7 mm. Verify the six-bolt hole pattern and diameter (10.6 mm) match the vehicle’s hub assembly. Proper torque specifications should be followed to avoid rotor warping. It is recommended to inspect brake pads and hardware during installation for optimal braking system performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor line to meet industry standards for durability and performance. While specific warranty details for part number 600-44000 are not provided here, Dynamite Friction products typically undergo rigorous quality control to ensure reliability in demanding conditions. Consult the manufacturer or distributor for warranty information related to this rotor.