Dynamite Friction 600-48011 Disc Brake Rotor - Front

DFC Brake Rotor for Chevrolet and GMC C2500

The Dynamite Friction DFC Brake Rotor, part number 600-48011, is a vented front disc brake rotor built for select Chevrolet C2500 and GMC C2500 applications. With a 295 mm outside diameter, 114.6 mm height, and 6-bolt pattern, it is sized for the front axle fitments listed below.

The DFC Brake Rotor line focuses on application-specific brake rotor replacement, and this rotor follows the dimensional requirements needed for the listed Chevrolet C2500 and GMC C2500 front brake setups.

• Part number 600-48011 for select front brake applications
• Vented rotor design for front disc brake use
• 295 mm outside diameter
• 114.6 mm overall height
• 6-bolt pattern with 14x1.50 bolt hole diameter
• 77.5 mm inside diameter
• Nominal thickness: 32.6 mm
• Discard thickness: 30.86 mm

Compatible Vehicle Fitment

• Fits 1995-1996 Chevrolet C2500, front, 2-Wheel ABS; DFC Brake Rotor.
• Fits 1996 GMC C2500, front, 2-Wheel ABS; DFC Brake Rotor.
• Fits 1990-1995 GMC C2500, front, 11 inch rear drums; 7,200 lb GVW; DFC Brake Rotor.
• Fits 1990-1994 Chevrolet C2500, front, 11 inch rear drums; 7,200 lb GVW; DFC Brake Rotor.
• Fits 1989 Chevrolet C2500, front, 11 inch rear drums; JB5 brakes; 7,200 lb GVW; DFC Brake Rotor.
• Fits 1989 GMC C2500, front, rear disc brake rotor designed for 11 inch rear drums; DFC Brake Rotor.
• Fits 1988 Chevrolet C2500, front, DFC Brake Rotor.
• Fits 1988 GMC C2500, front, DFC Brake Rotor.

What This Rotor Helps Address

• Front brake rotor wear on Chevrolet C2500 and GMC C2500 trucks
• Brake pulsation caused by rotor thickness variation or surface wear
• Reduced braking consistency from an out-of-spec front rotor
• Rotor replacement needs on 2-Wheel ABS and heavy-duty C2500 configurations
• Service requirements for vented front disc brake systems

Installation Notes and Tips

Confirm the vehicle’s year, make, model, front position, and brake configuration before ordering. This rotor is listed for specific Chevrolet C2500 and GMC C2500 applications, including 2-Wheel ABS, 11 inch rear drums, JB5 brakes, and 7,200 lb GVW configurations where noted. Verify the rotor dimensions, bolt pattern, and hub fitment against the existing part before installation.

Part number 600-48011 should be matched to the exact front axle application shown in the fitment table. For search relevance, this rotor is commonly referenced for Chevrolet C2500 front brake rotor replacement and GMC C2500 front disc brake rotor service.

Quality Assurance

Dynamite Friction DFC Brake Rotor components are built around application-specific dimensions and fitment data for the listed vehicles. This part cross-references no additional part numbers in the provided data.