Dynamite Friction 600-54305 Disc Brake Rotor - Rear

Reliable Performance with Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor 600-54305 offers dependable braking performance designed for vehicles requiring a vented disc brake rotor. Engineered with precise dimensions and a smooth surface finish, this rotor supports consistent stopping power and heat dissipation for a variety of automotive applications.

• Nominal thickness of 39 mm with a discard thickness of 37.5 mm
• Vented rotor design for improved heat management
• Plain disc finish with a smooth braking surface
• 10 bolt holes with a 13 mm diameter and 163 mm bolt circle diameter
• Outside diameter of 400 mm and height of 124.3 mm
• Center hole diameter of 139.3 mm for precise fitment
• Non-directional brake surface suitable for multiple vehicle orientations

About the DFC Brake Rotor Product Line

The DFC Brake Rotor line by Dynamite Friction focuses on delivering rotors that meet strict dimensional and material standards for consistent braking performance. This product line emphasizes vented rotors, like the 600-54305, which help reduce heat buildup during braking, extending rotor life and maintaining brake efficiency under demanding conditions.

Technical Details and Specifications

This disc brake rotor features a nominal thickness of 39 mm and a discard thickness of 37.5 mm, ensuring a clear threshold for rotor replacement. The vented design enhances airflow to dissipate heat effectively, reducing the risk of brake fade. With 10 bolt holes measuring 13 mm in diameter arranged on a 163 mm bolt circle, and a center hole diameter of 139.3 mm, this rotor is engineered for precise mounting. The rotor’s outside diameter of 400 mm and height of 124.3 mm accommodate specific vehicle fitments requiring these dimensions. The plain disc finish and smooth surface type provide consistent pad contact and braking response. The non-directional brake surface allows installation without concern for rotor orientation.

Compatible Vehicles and Common Applications

• Replacement rotor for vehicles requiring a 400 mm vented disc brake rotor
• Addresses issues such as brake rotor warping due to heat buildup
• Resolves uneven brake pad wear caused by rotor surface irregularities
• Improves braking consistency in vehicles experiencing fade under heavy use
• Suitable for vehicles with 10-lug wheel configurations matching the bolt pattern

Installation Notes and Tips

Ensure the rotor thickness is measured before installation to confirm it exceeds the discard thickness of 37.5 mm. Clean the rotor surface to remove any protective coatings or debris before mounting. Verify bolt hole alignment with the vehicle’s hub using the 163 mm bolt circle diameter and 13 mm bolt hole diameter. Since the rotor is non-directional, it can be installed on either side without affecting performance. Proper torque specifications should be followed when securing the rotor to avoid distortion.

Quality Assurance and Warranty Information

Dynamite Friction manufactures the DFC Brake Rotor 600-54305 to meet industry standards for durability and performance. While specific warranty details are not provided, the rotor’s design and material specifications support reliable operation under normal driving conditions. It is recommended to inspect rotors regularly and replace them when thickness approaches the discard limit to maintain safe braking performance.