Dynamite Friction 604-37008 Disc Brake Rotor - Front

Overview of Dynamite Friction DFC GEOSPEC Coated Rotor 604-37008

The Dynamite Friction DFC GEOSPEC Coated Rotor 604-37008 is engineered for reliable braking performance on select Acura, Honda, and Isuzu vehicles. Designed as a vented disc brake rotor, it offers enhanced heat dissipation and durability for models like the Honda Passport and Isuzu Trooper.

• Nominal thickness: 26 mm for consistent rotor life
• Discard thickness: 24.6 mm to ensure safe replacement intervals
• Vented rotor design improves cooling during braking
• Outside diameter of 280 mm fits specific Acura, Honda, and Isuzu models
• Six bolt holes with 12x1.25 mm diameter for secure mounting
• Height of 36 mm and inside diameter of 88.6 mm for precise fitment

Detailed Product Features and Specifications

This disc brake rotor, part number 604-37008, is a vented type rotor that helps reduce brake fade by allowing air to circulate between the rotor surfaces. The nominal thickness of 26 mm ensures structural integrity under braking stress, while the discard thickness of 24.6 mm indicates when the rotor should be replaced to maintain braking safety. The rotor’s 280 mm outside diameter and 88.6 mm inside diameter are designed to match the brake system specifications of vehicles such as the Acura SLX, Honda Amigo, and Isuzu VehiCROSS. The six bolt holes with a 12x1.25 mm diameter provide a secure and precise fit to the hub assembly.

About the DFC GEOSPEC Coated Rotor Product Line

The DFC GEOSPEC Coated Rotor line by Dynamite Friction focuses on rotors with protective coatings that help resist corrosion and extend rotor life. This coating is particularly beneficial for vehicles exposed to varying weather conditions, such as the Honda Axiom and Isuzu Rodeo. The 604-37008 rotor benefits from this coating, maintaining performance and appearance over time while meeting the exacting standards of the DFC GEOSPEC series.

Applications and Problem Solving

• Compatible with Acura, Honda, and Isuzu models including Amigo, Axiom, Passport, Rodeo, SLX, Trooper, and VehiCROSS
• Addresses brake rotor wear and thickness reduction issues
• Helps reduce brake fade through vented rotor design
• Prevents corrosion with specialized coating for longer service life
• Ensures proper fitment with exact bolt hole pattern and dimensions

Installation Notes and Tips

• Verify rotor thickness before installation; replace if below 24.6 mm discard thickness
• Ensure bolt hole alignment matches the 12x1.25 mm thread pitch and six-hole pattern
• Clean hub surface before mounting to prevent uneven rotor seating
• Torque lug nuts to manufacturer specifications for secure fitment
• Inspect brake pads and hardware during rotor replacement for optimal braking performance

Quality Assurance and Warranty

Dynamite Friction’s 604-37008 rotor is manufactured to meet industry standards for durability and performance. The DFC GEOSPEC Coated Rotor line includes corrosion-resistant coatings to enhance longevity. While specific warranty details are not provided, Dynamite Friction products typically adhere to quality control processes ensuring reliable operation when installed according to vehicle manufacturer guidelines.