/live/media/DF/DF_60442002_Fro.jpg)
Dynamite Friction 604-42002 Disc Brake Rotor - Front
| Brand | Dynamite Friction 604-42002 |
|---|---|
| Position | Front |
| Bolt Hole Diameter | 16.3 |
| Bolt Hole Quantity | 5 |
| Discard Thickness | 31.8 |
| Height | 53 |
| Inside Diameter | 72 |
| Nominal Thickness | 32 |
| Outside Diameter | 360 |
| Solid Or Vented Type Rotor | Vented |
| Product line | DFC GEOSPEC Coated Rotor |
| Fits | Jeep · 5 vehicles |
GEOSPEC coated rotor. Coating helps resist corrosion and keeps the rotor looking cleaner longer.
Vented design. Promotes airflow through the rotor for more consistent braking performance.
Disc brake rotor. A direct replacement rotor for dependable braking service.
Front Brake Rotor for Jeep Grand Cherokee
The Dynamite Friction DFC GEOSPEC Coated Rotor, part number 604-42002, is a vented front disc brake rotor for 2006-2010 Jeep Grand Cherokee applications. It is built around the listed rotor dimensions for direct-fit service on the front axle.
Key Features
- Brand: Dynamite Friction
- Brand line: DFC GEOSPEC Coated Rotor
- Part number: 604-42002
- Front disc brake rotor for Jeep Grand Cherokee
- Vented rotor design for front brake use
- Outside diameter: 360 mm
- Nominal thickness: 32 mm
- Discard thickness: 31.8 mm
- Inside diameter: 72 mm
- Bolt hole quantity: 5
- Bolt hole diameter: 16.3 mm
- Height: 53 mm
DFC GEOSPEC Coated Rotor Line
The DFC GEOSPEC Coated Rotor line focuses on coated brake rotor construction for service applications where consistent fitment and corrosion resistance around the hat and non-friction surfaces matter. This rotor follows the specified OE-style dimensions for the front brake system on the Jeep Grand Cherokee, with the part number 604-42002 identifying the exact application.
Detailed Description
Built for 2006-2010 Jeep Grand Cherokee front brake service, this vented disc brake rotor matches the listed 360 mm outside diameter, 32 mm nominal thickness, and 53 mm overall height. The 5-bolt pattern with 16.3 mm bolt holes and 72 mm inside diameter supports proper hub alignment for the specified vehicle fitment. If you are searching for a front brake rotor for 2006-2010 Jeep Grand Cherokee, part number 604-42002 provides a direct reference for ordering and catalog matching.
This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.
What It Is Used For
- Replacing a worn front rotor on a 2006-2010 Jeep Grand Cherokee
- Correcting brake pulsation caused by rotor wear or thickness variation
- Restoring proper rotor thickness after service limits are reached
- Addressing brake noise linked to uneven rotor surfaces
- Maintaining front brake system geometry on the specified Jeep Grand Cherokee fitment
Installation Notes and Tips
Verify rotor dimensions against the existing front brake setup before installation. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition during service. Confirm the vehicle is a 2006-2010 Jeep Grand Cherokee, front application before ordering or installation. Part number 604-42002 should be matched to the front axle only.
Quality Assurance
Dynamite Friction identifies this rotor as part of the DFC GEOSPEC Coated Rotor line and provides the listed dimensional specifications for fitment verification. Use the published measurements and vehicle coverage to confirm application accuracy for 2006-2010 Jeep Grand Cherokee front brake service.
| Year | Make | Model | Submodel | Position | Notes |
|---|---|---|---|---|---|
| 2010 | Jeep | Grand Cherokee | SRT8 | Front | DFC GEOSPEC Coated Rotor |
| 2009 | Jeep | Grand Cherokee | SRT8 | Front | DFC GEOSPEC Coated Rotor |
| 2008 | Jeep | Grand Cherokee | SRT8 | Front | DFC GEOSPEC Coated Rotor |
| 2007 | Jeep | Grand Cherokee | SRT8 | Front | DFC GEOSPEC Coated Rotor |
| 2006 | Jeep | Grand Cherokee | SRT8 | Front | DFC GEOSPEC Coated Rotor |
| No rows match your filter. | |||||