Dynamite Friction 604-48069 Disc Brake Rotor - Front

Overview of Dynamite Friction DFC GEOSPEC Coated Rotor 604-48069

The Dynamite Friction DFC GEOSPEC Coated Rotor 604-48069 is engineered for reliable braking performance on Isuzu ELF 200 and ELF 300 models. This vented disc brake rotor is designed to meet the specific requirements of these vehicles, ensuring consistent stopping power and durability.

• Compatible with Isuzu ELF 200 and ELF 300
• Part number 604-48069 for precise identification
• Vented rotor design for improved heat dissipation
• Nominal thickness of 42.22 mm and discard thickness of 39 mm
• 12 bolt holes with 12 mm diameter for secure mounting
• Outside diameter of 363 mm and inside diameter of 110 mm
• Height of 100.2 mm for proper fitment

Detailed Specifications and Features

This disc brake rotor features a vented design that helps reduce heat buildup during braking, which is critical for maintaining brake efficiency and preventing warping. The rotor’s nominal thickness is 42.22 mm, with a discard thickness of 39 mm, indicating when the rotor should be replaced to maintain safe braking performance. The 12 bolt holes, each with a 12 mm diameter, ensure a secure and stable fit on the Isuzu ELF 200 and ELF 300 models. With an outside diameter of 363 mm and an inside diameter of 110 mm, this rotor is engineered to match the exact specifications required for these vehicles. The rotor height of 100.2 mm further confirms its compatibility and proper installation.

About the DFC GEOSPEC Coated Rotor Product Line

The DFC GEOSPEC Coated Rotor line by Dynamite Friction focuses on providing rotors with specialized coatings that enhance corrosion resistance and extend service life. This coating helps protect the rotor surface from rust and environmental damage, which is especially beneficial for vehicles like the Isuzu ELF 200 and ELF 300 that may operate in varied conditions. The 604-48069 rotor benefits from this coating, contributing to consistent braking performance over time.

Applications and Problem Solving

• Replacement for worn or warped rotors on Isuzu ELF 200 and ELF 300
• Improves heat dissipation to reduce brake fade during heavy use
• Addresses rotor corrosion issues with coated surface
• Restores proper rotor thickness for safe braking
• Ensures secure mounting with correct bolt hole configuration

Installation Notes and Tips

When installing the Dynamite Friction DFC GEOSPEC Coated Rotor 604-48069, ensure the rotor thickness is measured and compared to the discard thickness of 39 mm before installation. Proper torque specifications should be followed for the 12 bolts with 12 mm diameter holes to avoid rotor distortion. It is recommended to inspect the brake pads and calipers during installation to ensure overall brake system integrity. Cleaning the rotor surface before installation can help remove any protective coatings or residues.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC GEOSPEC Coated Rotor 604-48069 to meet industry standards for durability and performance. The coated rotor surface provides additional protection against corrosion, contributing to longer service life. Warranty details should be confirmed with the distributor or manufacturer, as coverage may vary based on application and usage.