Dynamite Friction 604-48071 Disc Brake Rotor - Rear

Reliable Performance with Dynamite Friction DFC GEOSPEC Coated Rotor

The Dynamite Friction DFC GEOSPEC Coated Rotor 604-48071 offers a durable and precise braking solution for vehicles requiring vented disc brake rotors. Designed to meet specific thickness and diameter requirements, this rotor supports consistent braking performance under various driving conditions.

• Nominal thickness of 30 mm ensures structural integrity and heat dissipation
• Discard thickness set at 26.3 mm for safe rotor replacement intervals
• Vented rotor design improves cooling and reduces brake fade
• Outside diameter of 323 mm and inside diameter of 144.1 mm for accurate fitment
• Eight bolt holes with 1/2-13 diameter for secure mounting
• Height of 160.5 mm compatible with specific vehicle brake assemblies

About the DFC GEOSPEC Coated Rotor Product Line

The DFC GEOSPEC Coated Rotor line by Dynamite Friction focuses on rotors with protective coatings that help resist corrosion and extend rotor life. This coating is particularly beneficial for vehicles exposed to harsh weather or road conditions. The 604-48071 part number represents a vented rotor within this line, combining thermal management with durability.

Technical Details and Compatibility

This disc brake rotor features a vented design that enhances heat dissipation during braking, reducing the risk of warping and brake fade. The rotor’s nominal thickness of 30 mm and discard thickness of 26.3 mm provide clear guidelines for maintenance and replacement. With an outside diameter of 323 mm and inside diameter of 144.1 mm, it fits vehicles requiring these specific dimensions. The eight bolt holes, each with a 1/2-13 diameter, ensure proper alignment and secure installation.

Common Applications and Problem Solving

• Replacement for worn or warped rotors causing brake pulsation
• Upgrading to vented rotors for improved heat management
• Addressing corrosion issues with coated rotor surfaces
• Ensuring proper rotor thickness for safe braking performance
• Compatibility with vehicles requiring 8-bolt, 1/2-13 mounting patterns

Installation Notes and Tips

When installing the Dynamite Friction 604-48071 rotor, verify the rotor thickness before and after installation to ensure it meets the nominal 30 mm specification. Confirm bolt hole alignment with the vehicle’s hub assembly, and torque bolts to manufacturer specifications. The vented design requires proper clearance within the brake caliper assembly. Avoid contamination of the rotor surface with grease or oil during installation.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC GEOSPEC Coated Rotor to meet industry standards for durability and performance. While specific warranty details are not provided, the coated rotor design aims to reduce corrosion and extend service life, supporting reliable braking over time.