Dynamite Friction 604-54112 Disc Brake Rotor - Front or Rear

Reliable Performance with Dynamite Friction DFC GEOSPEC Coated Rotor

The Dynamite Friction DFC GEOSPEC Coated Rotor 604-54112 offers a durable and precise braking solution for vehicles requiring vented disc brake rotors. Designed to meet specific thickness and diameter specifications, this rotor supports consistent braking performance and heat dissipation.

• Nominal thickness of 38.2 mm ensures structural integrity
• Discard thickness set at 36.3 mm for safe rotor replacement
• Vented rotor design improves heat dissipation during braking
• 10 bolt holes with 13.1 mm diameter for secure mounting
• Outside diameter of 328 mm and inside diameter of 123.3 mm for exact fitment
• Height of 124 mm accommodates specific caliper and hub assemblies

About the DFC GEOSPEC Coated Rotor Product Line

The DFC GEOSPEC Coated Rotor line by Dynamite Friction focuses on rotors with protective coatings that resist corrosion and wear. This coating extends rotor life and maintains braking efficiency under various driving conditions. The 604-54112 part benefits from this coating, making it suitable for vehicles that require reliable vented rotors with precise dimensional standards.

Technical Specifications and Detailed Description

This disc brake rotor features a vented design that enhances cooling by allowing air to flow between the rotor surfaces, reducing the risk of brake fade during extended use. The nominal thickness of 38.2 mm and discard thickness of 36.3 mm provide clear guidelines for maintenance and replacement. With an outside diameter of 328 mm and an inside diameter of 123.3 mm, this rotor fits specific vehicle applications requiring these dimensions. The 10 bolt holes, each 13.1 mm in diameter, ensure compatibility with corresponding hubs and mounting hardware. The rotor height of 124 mm is designed to accommodate caliper assemblies that require this clearance.

Compatible Vehicles and Common Applications

• Replacement rotor for vehicles requiring vented disc brake rotors with 328 mm diameter
• Suitable for models needing 10-bolt mounting with 13.1 mm bolt hole diameter
• Ideal for vehicles experiencing brake rotor wear or warping
• Addresses issues such as brake noise, vibration, and reduced stopping power
• Used in maintenance to restore braking system performance and safety

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 36.3 mm before installation. Properly clean the rotor surface to remove any protective coating residue before mounting. Verify bolt hole alignment with the vehicle hub and torque bolts to manufacturer specifications. The vented design requires clearance for airflow, so confirm caliper compatibility with the 124 mm rotor height. Follow vehicle-specific service manuals for brake system procedures.

Quality Assurance and Warranty Information

Dynamite Friction manufactures the DFC GEOSPEC Coated Rotor 604-54112 to meet industry standards for durability and performance. The protective coating helps resist corrosion, extending rotor life. While specific warranty details are not provided, Dynamite Friction products typically adhere to quality control processes to ensure reliability in automotive braking applications.