Dynamite Friction 604-59027 Disc Brake Rotor - Front

Front Brake Rotor for Honda S2000

Dynamite Friction DFC GEOSPEC Coated Rotor 604-59027 is a front disc brake rotor for 2000-2009 Honda S2000 applications. It is a vented rotor with a 300 mm outside diameter, 25 mm nominal thickness, and 23 mm discard thickness for direct-fit brake service on the front axle.

Key Features

• Fits 2000-2009 Honda S2000, front
• DFC GEOSPEC coated rotor finish for corrosion resistance on exposed rotor surfaces
• Vented disc brake rotor design for front brake heat management
• 300 mm outside diameter with 39.6 mm height
• 5-bolt pattern with 12.6 mm bolt hole diameter
• 70.1 mm inside diameter for hub-centered fitment
• Part number 604-59027 for ordering and catalog lookup

DFC GEOSPEC Coated Rotor Line

The DFC GEOSPEC Coated Rotor line focuses on coated brake rotors for everyday street use, with surface protection on non-friction areas to help reduce visible corrosion. For Honda S2000 front brake rotor replacement, 604-59027 provides the dimensional specs needed for a proper OE-style service part selection.

Detailed Description

This Dynamite Friction disc brake rotor is built for the front position on the Honda S2000 and matches the listed fitment for 2000-2009 model years. The vented construction supports front brake cooling, while the 300 mm outside diameter, 25 mm nominal thickness, and 23 mm discard thickness give technicians the core measurements needed when comparing rotor wear limits and replacement dimensions. The 5-bolt layout, 12.6 mm bolt hole diameter, 70.1 mm inside diameter, and 39.6 mm height help confirm fitment during brake service. Part number 604-59027 is the reference to use when searching for a front Honda S2000 brake rotor, Honda S2000 front rotor replacement, or DFC GEOSPEC coated rotor 604-59027.

What It Helps Address

• Brake pulsation caused by worn or out-of-spec front rotors
• Reduced braking consistency from rotor wear beyond discard thickness
• Corrosion on rotor surfaces exposed to moisture and road debris
• Front brake service needs on a 2000-2009 Honda S2000
• Rotor replacement when the existing disc no longer matches OE dimensions

Installation Notes and Tips

Confirm the vehicle is a 2000-2009 Honda S2000 with front rotor application before installation. Compare the existing rotor’s outside diameter, height, bolt pattern, hub bore, and thickness measurements to 604-59027 before assembly. Clean the hub mounting surface thoroughly so the rotor seats flat, and inspect pads, calipers, and hardware condition during brake service. After installation, follow the vehicle manufacturer’s brake bedding procedure.

Quality Assurance

Dynamite Friction brake components are cataloged with application-specific dimensions and fitment data to support accurate parts selection. This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.