Dynamite Friction 604-67056 Disc Brake Rotor - Front

Front Brake Rotor for Nissan Applications

The Dynamite Friction DFC GEOSPEC Coated Rotor, part number 604-67056, is a front disc brake rotor built for specific Nissan passenger vehicles. It is a vented rotor with a 280 mm outside diameter, 24 mm nominal thickness, and 22 mm discard thickness for service replacement on the front axle.

Compatible With 2007-2012 Nissan Sentra, 2007-2012 Nissan Versa, and 2009-2014 Nissan Cube front brake applications. The coated surface is part of the DFC GEOSPEC Coated Rotor line, which focuses on corrosion resistance for rotor surfaces that are exposed during normal driving and storage.

Key Features

• Part number 604-67056
• Front disc brake rotor for Nissan fitments
• Vented rotor design for front brake use
• 280 mm outside diameter
• 24 mm nominal thickness and 22 mm discard thickness
• 4-bolt hole pattern with 12.8 mm bolt hole diameter
• 68 mm inside diameter and 44.1 mm height
• DFC GEOSPEC coated rotor finish

Detailed Description

Dynamite Friction 604-67056 is a DFC GEOSPEC Coated Rotor engineered as a front replacement disc brake rotor for select Nissan models. The vented construction supports front brake heat management, while the coated finish helps protect non-friction surfaces from corrosion. This rotor measures 280 mm in outside diameter, 44.1 mm in height, and uses a 4-bolt hole layout with 12.8 mm bolt holes and a 68 mm inside diameter.

This part number 604-67056 is listed for 2007-2012 Nissan Sentra, 2007-2012 Nissan Versa, and 2009-2014 Nissan Cube front brake service. If you are searching for a front brake rotor for a 2010 Nissan Sentra, a 2011 Nissan Versa, or a 2013 Nissan Cube, this application data matches those vehicles directly.

What This Rotor Helps Address

• Front brake rotor wear from normal pad contact
• Rotor surface corrosion on exposed non-friction areas
• Brake pulsation caused by worn or out-of-spec rotors
• Reduced braking consistency from damaged rotor surfaces
• Service replacement needs on Nissan Sentra, Versa, and Cube front brakes

Installation Notes and Tips

Verify rotor dimensions, bolt pattern, and hub fitment before installation. Confirm the rotor is being installed on the front position only, as listed for this application. Inspect brake pads, caliper condition, and hub surfaces during service to help ensure proper rotor seating and braking performance.

Quality Assurance

The DFC GEOSPEC Coated Rotor line is built around coated rotor construction for corrosion protection on exposed surfaces. Part number 604-67056 is cataloged for direct-fit front applications on the listed Nissan models, including Nissan Sentra, Nissan Versa, and Nissan Cube.