Dynamite Friction 604-67058 Disc Brake Rotor - Front

Dynamite Friction DFC GEOSPEC Coated Rotor Overview

The Dynamite Friction DFC GEOSPEC Coated Rotor, part number 604-67058, is a front disc brake rotor built for select Nissan applications. It features a vented design with a 296 mm outside diameter, 44 mm height, 5 bolt holes, and a 12.7 mm bolt hole diameter for application-specific fitment.

For drivers searching for a front brake rotor for Nissan Rogue, Nissan Rogue Select, Nissan X-Trail, or Nissan Sentra, this rotor is sized to match the listed vehicle applications and braking requirements.

Key Features

• Part number 604-67058
• DFC GEOSPEC coated rotor from Dynamite Friction
• Front disc brake rotor for listed Nissan models
• Vented rotor construction for front brake use
• Outside diameter: 296 mm
• Nominal thickness: 26 mm
• Discard thickness: 24 mm
• Height: 44 mm
• Inside diameter: 68 mm
• 5-bolt hole design with 12.7 mm bolt hole diameter

Product Details

The DFC GEOSPEC Coated Rotor line is focused on coated brake rotor applications where dimensional accuracy matters. This rotor is specified for front axle use on 2007-2012 Nissan Sentra, 2008-2013 Nissan Rogue, 2008-2014 Nissan X-Trail, and 2014-2015 Nissan Rogue Select. The vented design supports front brake service on these vehicles, while the listed thickness and diameter measurements help confirm proper rotor selection before installation. Part number 604-67058 is the reference to use when matching this rotor to the correct Nissan brake application.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What This Rotor Helps Address

• Front brake rotor wear on a Nissan Rogue, Nissan Rogue Select, Nissan X-Trail, or Nissan Sentra
• Rotor replacement needs when the existing disc is below discard thickness
• Brake pulsation caused by worn or out-of-spec front rotors
• Noise or uneven braking linked to rotor surface condition
• Fitment issues when replacing a vented front rotor with the correct dimensions

Installation Notes

Verify rotor dimensions, bolt pattern, and hub fitment against the vehicle before installation. This rotor is listed for front position applications only, so confirm the vehicle year and model match the fitment data for 2007-2012 Nissan Sentra, 2008-2013 Nissan Rogue, 2008-2014 Nissan X-Trail, or 2014-2015 Nissan Rogue Select. Clean the hub mounting surface and inspect related brake components during service to help ensure proper rotor seating.

Quality Assurance

Dynamite Friction identifies this as a DFC GEOSPEC coated rotor, with published dimensional specifications provided for application matching and brake service accuracy. Use the part number 604-67058 and the listed measurements to confirm the correct front rotor for the vehicle.