Dynamite Friction 620-03026 Disc Brake Rotor - Front

Overview of Dynamite Friction DFC Brake Rotor - Drilled

The Dynamite Friction DFC Brake Rotor - Drilled (part number 620-03026) is engineered for Hyundai Tiburon models requiring reliable disc brake rotors. This vented rotor design enhances heat dissipation and braking performance under demanding conditions.

• Compatible with Hyundai Tiburon vehicles
• Part Number: 620-03026
• Vented disc brake rotor with drilled design
• Outside diameter: 303 mm
• Nominal thickness: 26 mm, discard thickness: 24.4 mm
• Five bolt holes with 12.5 mm diameter each
• Inside diameter: 69 mm
• Height: 47.4 mm

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled is a vented rotor, which means it has internal vanes between the two friction surfaces to improve airflow and reduce heat buildup during braking. The drilled holes further aid in heat dissipation and help prevent brake fade by allowing gases and debris to escape. With an outside diameter of 303 mm and a height of 47.4 mm, this rotor fits precisely on Hyundai Tiburon models designed for a five-lug bolt pattern with 12.5 mm bolt hole diameter. The nominal thickness of 26 mm ensures durability, while the discard thickness of 24.4 mm indicates when the rotor should be replaced to maintain safe braking performance.

DFC Brake Rotor - Drilled Product Line Information

The DFC Brake Rotor - Drilled line from Dynamite Friction focuses on rotors that combine vented construction with drilled holes to optimize cooling and braking efficiency. This product line is designed to meet the specific requirements of vehicles like the Hyundai Tiburon, providing a balance between performance and longevity without compromising safety.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Hyundai Tiburon
• Improves heat dissipation to reduce brake fade during heavy braking
• Addresses vibration or pulsation issues caused by uneven rotor surfaces
• Helps maintain consistent braking performance under high-stress conditions
• Suitable for vehicles experiencing reduced braking efficiency due to rotor wear

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 24.4 mm before installation. Properly clean the rotor surface to remove any protective coatings or debris. Verify bolt hole alignment with the vehicle’s hub and torque lug nuts to manufacturer specifications. It is recommended to inspect brake pads and replace them if worn to ensure optimal rotor performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the 620-03026 rotor to meet industry standards for durability and performance. While specific warranty details are not provided, this rotor is designed to comply with OEM fitment and quality requirements for Hyundai Tiburon vehicles.