Dynamite Friction 631-03024R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-03024R) is engineered for Hyundai Elantra models requiring reliable braking performance. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power.

• Compatible with Hyundai Elantra vehicles
• Part Number: 631-03024R
• Solid rotor with drilled and slotted surface
• Nominal thickness: 10 mm; discard thickness: 8.4 mm
• Outside diameter: 262 mm; overall height: 60.9 mm
• 5 bolt holes with 12.5 mm diameter; bolt circle diameter: 114.3 mm
• Zinc silver hat finish with rust-resistant coating
• Directional brake surface for optimized performance

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Silver is a solid rotor designed to fit Hyundai Elantra models, featuring a 262 mm outside diameter and an overall height of 60.9 mm. The rotor’s nominal thickness is 10 mm, with a discard thickness of 8.4 mm, ensuring clear service limits for safe replacement. The rotor surface is both drilled and slotted, which helps to reduce brake fade by improving heat dissipation and removing debris from the braking surface. The directional design of the rotor surface further supports efficient braking performance under various driving conditions.

The rotor’s hat is finished in zinc silver, providing corrosion resistance, complemented by an overall rust-resistant coating to extend the rotor’s service life. It includes five bolt holes with a diameter of 12.5 mm and a bolt circle diameter of 114.3 mm, matching the Hyundai Elantra’s wheel hub specifications. The center hole diameter is 76 mm, ensuring proper fitment and alignment.

About the DFC Brake Rotor - Drilled and Slotted - Silver Product Line

The DFC Brake Rotor - Drilled and Slotted - Silver line from Dynamite Friction focuses on delivering rotors with enhanced surface designs for improved braking efficiency. The drilled and slotted features are intended to optimize heat dissipation and maintain clean contact surfaces, which can contribute to consistent brake pad engagement and reduced brake fade. This product line is suitable for drivers seeking rotors that balance performance and durability for daily driving conditions.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Hyundai Elantra models
• Improves heat dissipation to reduce brake fade during extended braking
• Helps prevent brake pad glazing by removing dust and debris
• Addresses rotor corrosion issues with rust-resistant coating
• Maintains braking performance with directional surface design

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 8.4 mm before installation. Clean the rotor surface to remove any protective coatings or residues prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 5-bolt, 114.3 mm bolt circle pattern. Proper torque specifications should be followed when securing the rotor to avoid warping. It is recommended to inspect brake pads and hardware during rotor replacement for optimal braking system performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the 631-03024R rotor with corrosion-resistant coatings and precise machining to meet OEM fitment standards for Hyundai Elantra vehicles. While specific warranty details are not provided, the product is designed to comply with industry quality and safety requirements for disc brake rotors.