Dynamite Friction 631-54274L Disc Brake Rotor - Front Left

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver is engineered for reliable braking performance on Ford Edge vehicles. Designed with precision, this vented disc brake rotor offers enhanced heat dissipation and improved stopping power for consistent braking under various driving conditions.

• Compatible with Ford Edge models
• Part Number: 631-54274L
• Vented rotor design for better heat management
• Directional drilled and slotted surface for improved brake pad bite and debris removal
• Rust resistant zinc silver hat finish
• Nominal thickness of 32 mm with discard thickness at 30.5 mm
• Outside diameter of 345 mm and height of 52.5 mm
• 5 bolt holes with 15.6 mm diameter and 108 mm bolt circle diameter
• Center hole diameter of 63.5 mm

About the DFC Brake Rotor - Drilled and Slotted - Silver Line

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots in a directional pattern. This design enhances braking efficiency by allowing gases and debris to escape while maintaining rotor integrity. The zinc silver coating on the rotor hat provides corrosion resistance, extending the rotor's service life, especially in environments prone to rust.

Detailed Product Description

This disc brake rotor is specifically designed for the Ford Edge, ensuring precise fitment and optimal braking performance. The rotor features a vented construction that improves airflow to reduce heat buildup during braking. Its surface is both drilled and slotted in a directional pattern, which helps maintain consistent pad contact and reduces brake fade. The rotor’s nominal thickness is 32 mm, with a discard thickness of 30.5 mm, indicating when replacement is necessary to maintain safety. The zinc silver finish on the rotor hat offers rust resistance, helping to preserve the rotor’s structural integrity over time. With 5 bolt holes sized at 15.6 mm diameter and a bolt circle diameter of 108 mm, this rotor matches the Ford Edge’s specifications for secure installation.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Ford Edge vehicles
• Improves braking response and reduces brake fade under heavy use
• Helps eliminate brake noise caused by uneven rotor surfaces
• Addresses rust and corrosion issues on rotor hats
• Enhances heat dissipation to prevent premature brake component wear

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 30.5 mm before installation. Clean the rotor surface to remove any protective coatings or debris prior to mounting. Verify bolt hole alignment with the Ford Edge hub and torque lug nuts to manufacturer specifications. Directional rotors must be installed following the indicated rotation direction for optimal performance. It is recommended to inspect brake pads and replace them if worn when installing new rotors.

Quality Assurance

Dynamite Friction manufactures this rotor to meet OEM specifications for fit and function on Ford Edge models. The rust resistant zinc silver coating helps extend rotor life by protecting against corrosion. While no specific warranty information is provided, the rotor’s design and materials support durability and consistent braking performance when installed and maintained properly.