Dynamite Friction 631-54283L Disc Brake Rotor - Front Left

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-54283L) is engineered for reliable braking performance on Ford Transit models. Designed specifically for the Transit-150, Transit-250, Transit-350, and Transit-350 HD, this vented disc brake rotor offers enhanced heat dissipation and consistent stopping power.

• Compatible with Ford Transit-150, Transit-250, Transit-350, and Transit-350 HD
• Part Number: 631-54283L
• Vented disc design with drilled and slotted surface
• Nominal thickness of 33 mm and discard thickness of 30 mm
• Directional brake surface for optimized performance
• Rust resistant zinc silver hat finish and plain disc finish
• 6 bolt holes with 12x1.5 mm diameter and 132 mm bolt circle diameter
• Outside diameter of 302 mm and height of 61.7 mm

Details on the DFC Brake Rotor - Drilled and Slotted - Silver Line

The DFC Brake Rotor - Drilled and Slotted - Silver line from Dynamite Friction focuses on rotors that combine drilled holes and slots to improve brake pad bite and heat dissipation. This product line is designed to reduce brake fade and maintain consistent braking under demanding conditions. The silver zinc coating on the rotor hat provides corrosion resistance, extending the rotor's service life, especially in environments prone to rust.

Technical Specifications and Features

This disc brake rotor features a vented design that allows air to flow between the rotor surfaces, helping to dissipate heat more effectively during braking. The rotor's surface is both drilled and slotted, which aids in removing brake dust, gases, and water from the contact area, improving braking efficiency. The directional brake surface ensures the rotor is installed correctly for optimal performance. With a nominal thickness of 33 mm and a discard thickness of 30 mm, this rotor maintains structural integrity and safety standards throughout its service life.

Applications and Problem Solving

• Replacement rotor for worn or warped rotors on Ford Transit-150, Transit-250, Transit-350, and Transit-350 HD
• Addresses brake fade caused by excessive heat buildup
• Improves braking performance in wet or dusty conditions
• Helps reduce brake noise and vibration associated with rotor surface irregularities
• Prevents rust and corrosion on rotor hats for longer durability

Installation Notes and Tips

Ensure the rotor is installed with the directional surface facing the correct rotation direction as indicated. Verify bolt hole alignment with the 6-hole, 12x1.5 mm bolt pattern and 132 mm bolt circle diameter. Measure rotor thickness before installation to confirm it meets or exceeds the discard thickness of 30 mm. Clean the rotor surface to remove any protective coatings or debris before mounting to ensure proper pad contact.

Quality Assurance and Warranty

Dynamite Friction manufactures this rotor to meet or exceed OEM specifications for Ford Transit vehicles. The rust-resistant zinc silver coating on the rotor hat enhances corrosion protection. While specific warranty details are not provided, Dynamite Friction products typically undergo rigorous quality control to ensure durability and performance.