Dynamite Friction 631-59027R Disc Brake Rotor - Front Right

Overview of Dynamite Friction DFC Brake Rotor for Honda S2000

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-59027R) is engineered specifically for the Honda S2000. This vented disc brake rotor combines drilled and slotted surface features to enhance braking performance and heat dissipation under demanding conditions.

• Compatible with Honda S2000 models
• Part number 631-59027R for precise identification
• Vented disc design for improved cooling
• Drilled and slotted directional surface for enhanced brake pad bite and debris removal
• Zinc silver hat finish with rust-resistant coating
• Nominal thickness of 25 mm with discard thickness at 23 mm
• 5 bolt holes with 12.6 mm diameter and 114.3 mm bolt circle diameter
• Overall diameter of 300 mm and height of 39.6 mm

Details on the DFC Brake Rotor - Drilled and Slotted - Silver Product Line

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that provide a balance of durability and performance. Featuring a vented rotor design with a directional, slotted, and drilled surface, this product line is designed to optimize heat dissipation and maintain consistent braking under various driving conditions. The zinc silver hat finish and rust-resistant coating extend the rotor's service life by protecting against corrosion.

Technical Specifications and Features

This disc brake rotor is vented to allow air to flow between the rotor surfaces, reducing heat buildup during braking. The directional slotted and drilled surface improves pad bite and helps evacuate gases, dust, and water from the braking surface. The rotor measures 300 mm in outside diameter with a nominal thickness of 25 mm and a discard thickness of 23 mm, ensuring it meets OEM standards for replacement. The 5-bolt hole pattern with a 114.3 mm bolt circle diameter and 12.6 mm bolt hole diameter matches the Honda S2000's factory specifications. The zinc silver hat finish combined with a rust-resistant coating helps prevent corrosion, maintaining rotor integrity over time.

Applications and Problem Solving

• Replacement rotor for worn or warped Honda S2000 brake rotors
• Improves heat dissipation to reduce brake fade during spirited driving
• Helps maintain consistent braking performance in wet or dusty conditions
• Addresses rotor surface glazing and uneven pad wear
• Prevents rust and corrosion on rotor hats for longer service life

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 23 mm before installation. Clean the rotor surface to remove any protective coatings or oils prior to mounting. Verify the 5-lug bolt pattern and 114.3 mm bolt circle diameter match your Honda S2000 hub assembly. Use proper torque specifications for lug nuts to avoid rotor warping. It is recommended to replace brake pads when installing new rotors to ensure optimal braking performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the 631-59027R rotor to meet or exceed OEM standards for fit, form, and function. The rust-resistant coating and zinc silver hat finish contribute to durability and corrosion resistance. Warranty details are provided by the manufacturer and should be confirmed at the time of purchase.