Dynamite Friction 631-59029R Disc Brake Rotor - Rear Right

Overview of the DFC Brake Rotor - Drilled and Slotted - Silver

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-59029R) is engineered for Acura and Honda vehicles, specifically designed for models like the Accord and TSX. This solid disc brake rotor features a directional, slotted, and drilled surface to enhance braking performance and heat dissipation.

• Compatible with Acura and Honda Accord and TSX models
• Part number 631-59029R for precise identification
• Solid rotor design with drilled and slotted surface
• Rust-resistant zinc silver hat finish
• Directional brake surface for optimized performance
• Nominal thickness of 9 mm and discard thickness of 8 mm
• 5 bolt holes with 12.7 mm diameter and 114.3 mm bolt circle diameter
• Overall diameter of 260 mm and height of 48.8 mm

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Silver is a solid disc brake rotor designed to meet the braking demands of Acura and Honda vehicles such as the Accord and TSX. The rotor features a 260 mm outside diameter and an overall height of 48.8 mm, ensuring proper fitment and compatibility. The rotor surface is both drilled and slotted, which helps to reduce brake fade by improving heat dissipation and removing brake dust and gases during operation. The directional surface design further enhances braking efficiency by channeling heat and debris away from the rotor surface.

The rotor’s nominal thickness is 9 mm, with a discard thickness of 8 mm, indicating when replacement is necessary to maintain safe braking performance. The zinc silver coating on the rotor hat provides rust resistance, extending the rotor’s service life. It includes five bolt holes with a diameter of 12.7 mm and a bolt circle diameter of 114.3 mm, matching the stud/lug hole pattern for secure installation.

About the DFC Brake Rotor - Drilled and Slotted - Silver Product Line

The DFC Brake Rotor - Drilled and Slotted - Silver line from Dynamite Friction focuses on delivering rotors with enhanced surface treatments to improve braking response and durability. This product line combines drilled holes and slots on a solid rotor base, providing a balance between heat management and structural integrity. The silver zinc coating on the rotor hat adds corrosion resistance, making it suitable for daily driving conditions on Acura and Honda vehicles.

Common Applications and Problem Solving

• Reduces brake fade during extended or aggressive braking
• Improves heat dissipation to prevent rotor warping
• Helps remove brake dust and gases for consistent pad contact
• Resists rust and corrosion for longer rotor life
• Ensures proper fitment for Acura Accord and Honda TSX models

Installation Notes and Tips

• Verify compatibility with your specific Acura or Honda model before installation
• Check rotor thickness and replace if below discard thickness of 8 mm
• Ensure proper torque on the 5 lug bolts with 12.7 mm diameter
• Clean rotor surface before installation to remove any protective coatings
• Follow manufacturer’s recommended break-in procedure for new rotors

Quality Assurance and Warranty

Dynamite Friction manufactures the 631-59029R rotor to meet industry standards for durability and performance. The rust-resistant zinc silver finish helps maintain rotor integrity over time. While specific warranty details are not provided, Dynamite Friction products typically adhere to quality control processes to ensure reliable fitment and function on Acura and Honda vehicles.