Dynamite Friction 631-65012R Disc Brake Rotor - Rear Right

Overview of the DFC Brake Rotor for Saab 9-5

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver is engineered specifically for the Saab 9-5, providing reliable braking performance. This disc brake rotor, part number 631-65012R, features a solid design with a directional, slotted, and drilled surface to enhance heat dissipation and braking efficiency.

• Compatible with Saab 9-5 models
• Part Number: 631-65012R
• Solid disc brake rotor with drilled and slotted surface
• Nominal thickness of 10 mm and discard thickness of 8 mm
• Rust resistant zinc silver hat finish and plain disc finish
• Directional brake surface for optimized braking
• 5 bolt holes with a bolt circle diameter of 110 mm
• Overall diameter of 286 mm and height of 69.2 mm

Details on the DFC Brake Rotor - Drilled and Slotted - Silver Line

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction is designed to offer enhanced braking performance through its drilled and slotted surface. This design helps to reduce brake fade by improving heat dissipation and allowing gases and debris to escape during braking. The silver zinc coating on the rotor hat provides corrosion resistance, extending the rotor's service life. This product line focuses on solid rotors with directional surfaces, suitable for vehicles like the Saab 9-5 that require reliable and consistent braking under various driving conditions.

Technical Specifications and Features

This rotor features a nominal thickness of 10 mm and a discard thickness of 8 mm, ensuring it meets safety standards for wear limits. The rotor is solid rather than vented, with a 286 mm outside diameter and an overall height of 69.2 mm. The hat finish is zinc silver, providing rust resistance, while the disc finish is plain with a slotted and drilled surface type. The rotor includes 5 bolt holes with a bolt circle diameter of 110 mm and a center hole diameter of 65.5 mm, matching the Saab 9-5's specifications. The directional brake surface is designed to optimize braking performance and pad contact.

Common Applications and Problem Solving

• Replacement for worn or warped brake rotors on Saab 9-5
• Improves heat dissipation to reduce brake fade during heavy braking
• Helps prevent rust and corrosion with zinc silver coating
• Enhances braking response with slotted and drilled surface design
• Maintains proper braking performance with precise fitment and thickness specifications

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 8 mm before installation. The rotor is directional, so install it following the correct rotation direction for optimal performance. Verify bolt hole alignment with the 5-lug pattern and 110 mm bolt circle diameter on the Saab 9-5. Clean the rotor surface before mounting to remove any protective coatings or residues. Proper torque specifications should be followed when securing the rotor to avoid warping.

Quality Assurance and Warranty

Dynamite Friction manufactures the DFC Brake Rotor - Drilled and Slotted - Silver to meet industry standards for durability and performance. The rust-resistant zinc silver hat finish helps extend the rotor's lifespan. While specific warranty details are not provided, Dynamite Friction products typically adhere to quality control measures to ensure reliable braking components for Saab 9-5 vehicles.