Dynamite Friction 631-67100R Disc Brake Rotor - Front Right

Overview of DFC Brake Rotor - Drilled and Slotted - Silver

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-67100R) is engineered for Nissan Juke and Sentra models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance braking performance and heat dissipation.

• Compatible with Nissan Juke and Sentra vehicles
• Directional, slotted and drilled surface for improved braking
• Vented rotor design for efficient heat dissipation
• Rust-resistant zinc silver hat finish
• 5 bolt holes with 114.3 mm bolt circle diameter
• Nominal thickness of 26 mm and discard thickness of 24 mm
• Overall diameter of 295 mm and center hole diameter of 68 mm

Product Line Details: DFC Brake Rotor - Drilled and Slotted - Silver

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction offers rotors with a combination of drilled holes and slots on the braking surface. This design helps to reduce brake fade by allowing gases and debris to escape, while the vented rotor construction improves cooling during heavy braking. The zinc silver coating on the rotor hat provides corrosion resistance, extending the rotor's service life. This product line is tailored for drivers seeking reliable braking components compatible with specific Nissan models.

Technical Specifications and Features

This disc brake rotor is vented, which means it has internal vanes between the rotor faces to promote airflow and reduce heat buildup. The rotor's surface is both drilled and slotted, providing a directional braking surface that helps maintain consistent pad contact and improves water and dust evacuation. The rotor measures 295 mm in outside diameter with a height of 44 mm. It has a nominal thickness of 26 mm and a discard thickness of 24 mm, indicating when replacement is necessary. The rotor features five bolt holes with a bolt circle diameter of 114.3 mm and a center hole diameter of 68 mm. The zinc silver finish on the hat offers rust resistance, helping to maintain structural integrity over time.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Nissan Juke and Sentra
• Improves braking performance under heavy use or high temperatures
• Reduces brake fade caused by heat buildup
• Helps prevent rust and corrosion on rotor hats
• Addresses uneven brake pad wear due to rotor surface design

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 24 mm before installation. Clean the rotor surface to remove any protective coating or debris prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 114.3 mm bolt circle diameter and 5-lug pattern. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the correct rotation direction for optimal performance.

Quality Assurance

Dynamite Friction manufactures this rotor to meet OEM specifications for Nissan Juke and Sentra models. The rust-resistant zinc silver coating on the rotor hat enhances durability. While no specific warranty information is provided, the rotor’s design and materials support reliable braking performance and longevity when installed and maintained properly.