Dynamite Friction 631-67114R Disc Brake Rotor - Front Right

Overview of DFC Brake Rotor for Nissan Kicks and Sentra

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-67114R) is engineered for Nissan Kicks and Sentra models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance braking performance and heat dissipation.

• Compatible with Nissan Kicks and Sentra
• Vented disc brake rotor with drilled and slotted surface
• Nominal thickness of 24 mm and discard thickness of 22 mm
• Silver zinc-coated hat finish with rust-resistant coating
• 5 bolt holes with a bolt circle diameter of 114.3 mm
• Outside diameter of 280 mm and height of 44.2 mm
• Directional brake surface for optimized braking

Details on the DFC Brake Rotor - Drilled and Slotted - Silver Line

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction offers rotors with enhanced surface features such as drilled holes and slots. These design elements improve water and gas evacuation during braking, reducing brake fade and maintaining consistent performance. The silver zinc hat finish provides corrosion resistance, extending rotor life especially in environments prone to rust.

Technical Specifications and Features

This disc brake rotor is vented to allow better airflow and heat dissipation, which helps maintain braking efficiency under demanding conditions. The rotor’s nominal thickness is 24 mm, with a discard thickness of 22 mm, ensuring safe replacement intervals. The rotor surface is both drilled and slotted, which aids in debris removal and improves pad bite. The hat section is finished in zinc silver to resist corrosion, and the entire rotor has a rust-resistant coating for added durability. It features a 5-bolt hole pattern with a bolt circle diameter of 114.3 mm and a center hole diameter of 68 mm, matching the specifications required for Nissan Kicks and Sentra models.

Applications and Problem Solving

• Replacement rotor for worn or warped brake rotors on Nissan Kicks and Sentra
• Improves braking response and reduces brake fade during heavy use
• Helps prevent rust and corrosion-related rotor damage
• Addresses issues with brake noise and vibration caused by uneven rotor surfaces
• Maintains consistent braking performance in wet or humid conditions

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 22 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants before mounting. Verify the 5-lug bolt pattern and bolt circle diameter of 114.3 mm matches your vehicle’s hub. Proper torque specifications should be followed when tightening lug nuts to avoid rotor warping. It is recommended to inspect brake pads and replace them if worn to ensure optimal rotor performance.

Quality Assurance and Warranty

Dynamite Friction manufactures the 631-67114R rotor to meet OEM specifications for Nissan Kicks and Sentra vehicles. The rust-resistant coating and zinc silver hat finish contribute to long-term durability. While specific warranty details are not provided, Dynamite Friction products typically adhere to industry standards for quality and reliability.