Dynamite Friction 631-72044R Disc Brake Rotor - Front Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver is engineered for reliable braking performance on Mitsubishi Lancer models. Designed with precision, this vented disc brake rotor offers enhanced heat dissipation and improved stopping power for everyday driving and demanding conditions.

• Part Number: 631-72044R
• Compatible with Mitsubishi Lancer vehicles
• Drilled and slotted surface for better heat and gas dissipation
• Vented rotor design to reduce brake fade
• Rust resistant zinc silver hat finish
• 5 bolt holes with 114.3 mm bolt circle diameter
• Nominal thickness of 24 mm and discard thickness of 22.4 mm
• Directional brake surface for optimized braking
• Overall diameter of 294 mm and height of 45.9 mm

Details on the DFC Brake Rotor - Drilled and Slotted - Silver Line

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on rotors that combine drilled holes and slots to improve braking efficiency. This design helps to evacuate heat, water, and brake dust from the rotor surface, which is critical for maintaining consistent brake performance. The silver zinc coating on the rotor hat provides corrosion resistance, extending the rotor's service life, especially in environments prone to rust.

Technical Specifications and Features

This disc brake rotor features a vented design that allows air to flow between the rotor surfaces, reducing heat buildup during braking. The rotor's surface is both drilled and slotted, which aids in gas and debris removal, improving pad bite and reducing brake fade. The rotor has a nominal thickness of 24 mm and a discard thickness of 22.4 mm, ensuring it meets safety standards for replacement. The 5-bolt hole pattern with a 114.3 mm bolt circle diameter fits securely on Mitsubishi Lancer models. The rotor's directional surface design optimizes braking performance by channeling gases and heat away from the contact area.

Common Applications and Problem Solving

• Replacement for worn or warped rotors on Mitsubishi Lancer vehicles
• Improves braking response and reduces brake fade under heavy use
• Helps prevent rust and corrosion with zinc silver coating
• Reduces brake dust buildup and improves pad life
• Enhances heat dissipation for consistent braking performance

Installation Notes and Tips

Ensure the rotor surface is clean and free of any contaminants before installation. Verify the rotor thickness is within specifications, replacing if below the discard thickness of 22.4 mm. Use proper torque settings on the 5 lug bolts with a 114.3 mm bolt circle diameter to secure the rotor. The directional surface requires correct orientation during installation to maintain optimal braking efficiency. It is recommended to inspect brake pads and hardware during rotor replacement for best results.

Quality Assurance and Warranty

Dynamite Friction manufactures the 631-72044R rotor to meet or exceed OEM standards for fit, form, and function. The rust-resistant zinc silver finish helps extend rotor life in corrosive environments. While specific warranty details are not provided, Dynamite Friction products typically undergo rigorous quality control to ensure durability and performance on Mitsubishi Lancer vehicles.