Dynamite Friction 631-72060L Disc Brake Rotor - Rear Left

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-72060L) is engineered for reliable braking performance on Mitsubishi Endeavor and Grandis models. This solid disc brake rotor features a directional, drilled and slotted surface designed to enhance heat dissipation and maintain consistent stopping power.

• Compatible with Mitsubishi Endeavor and Grandis vehicles
• Part number 631-72060L for precise identification
• Directional drilled and slotted surface for improved brake cooling
• Solid rotor design with zinc silver hat finish for corrosion resistance
• Rust resistant coating to extend rotor life
• 5 bolt holes with 114.3 mm bolt circle diameter
• Nominal thickness of 10.12 mm and discard thickness of 8.4 mm
• Overall diameter of 302 mm and height of 58.7 mm

About the DFC Brake Rotor - Drilled and Slotted - Silver Line

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction offers rotors with enhanced surface features such as drilled holes and slots. These design elements help reduce brake fade by improving heat and gas dissipation during braking. The silver zinc coating on the rotor hat provides additional protection against rust, making this line suitable for drivers seeking durability and consistent braking performance on their Mitsubishi Endeavor or Grandis.

Technical Specifications and Features

This disc brake rotor is a solid type with a directional surface pattern combining drilled holes and slots. The rotor measures 302 mm in outside diameter and 58.7 mm in overall height, with a center hole diameter of 69 mm. It includes five bolt holes with a bolt circle diameter of 114.3 mm and stud/lug hole diameter of 12.6 mm, matching the factory specifications for the Mitsubishi Endeavor and Grandis. The nominal thickness is 10.12 mm, with a discard thickness of 8.4 mm, ensuring safe replacement intervals. The rotor’s plain disc finish and zinc silver hat finish contribute to corrosion resistance, supported further by a rust resistant coating.

Applications and Problem Solving

• Replacement rotor for worn or warped brake discs on Mitsubishi Endeavor and Grandis
• Improves heat dissipation to reduce brake fade during heavy braking
• Addresses brake noise and vibration caused by uneven rotor surfaces
• Prevents rust and corrosion that can compromise braking efficiency
• Maintains consistent braking performance under varied driving conditions

Installation Notes and Tips

Ensure the rotor is compatible with your Mitsubishi Endeavor or Grandis by verifying the part number 631-72060L. Clean the hub surface before installation to prevent runout. Use proper torque specifications on the 5 lug bolts to secure the rotor. Since this rotor features a directional drilled and slotted surface, install it following the indicated rotation direction for optimal performance. Inspect brake pads for wear and replace if necessary to maximize braking efficiency.

Quality Assurance

Dynamite Friction manufactures this rotor to meet OEM specifications for fit and function. The rust resistant coating and zinc silver hat finish provide extended durability. While specific warranty details are not provided, the rotor is designed to maintain structural integrity and braking performance within the recommended thickness limits. Always replace rotors when thickness reaches the discard thickness of 8.4 mm to ensure safety.