Dynamite Friction 631-76006R Disc Brake Rotor - Front Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-76006R) is engineered for Toyota Corolla models requiring reliable braking performance. This solid disc brake rotor features a directional, slotted and drilled surface designed to enhance heat dissipation and maintain consistent stopping power.

• Compatible with Toyota Corolla vehicles
• Solid rotor design with drilled and slotted surface
• Nominal thickness of 12.5 mm and discard thickness of 11.5 mm
• Zinc silver hat finish with rust-resistant coating
• Directional brake surface for optimized braking efficiency
• Four bolt holes with an 87 mm bolt circle diameter
• Overall diameter of 229 mm and center hole diameter of 64 mm

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Silver is a solid rotor with a 229 mm outside diameter and an overall height of 23 mm. The rotor’s surface is both drilled and slotted, which helps to reduce brake fade by improving heat and gas dissipation during braking. The directional design of the brake surface ensures proper alignment for optimal performance. The rotor’s hat is finished in zinc silver, providing corrosion resistance, complemented by an overall rust-resistant coating to extend service life. With four bolt holes and a bolt circle diameter of 87 mm, this rotor is designed to fit securely on compatible Toyota Corolla models. The nominal thickness is 12.5 mm, with a discard thickness of 11.5 mm, indicating when the rotor should be replaced to maintain safe braking.

About the DFC Brake Rotor - Drilled and Slotted - Silver Product Line

The DFC Brake Rotor - Drilled and Slotted - Silver line from Dynamite Friction focuses on delivering rotors that combine enhanced heat management with corrosion resistance. This product line features rotors with drilled and slotted surfaces to improve braking consistency under demanding conditions. The silver zinc finish on the rotor hat adds durability against rust, making it suitable for vehicles exposed to various weather conditions. This part line is designed to meet the specific fitment and performance needs of vehicles like the Toyota Corolla.

Common Applications and Problem Solving

• Replacement for worn or warped brake rotors on Toyota Corolla
• Improves heat dissipation to reduce brake fade during heavy braking
• Addresses brake noise and vibration caused by uneven rotor surfaces
• Helps maintain consistent braking performance in wet or corrosive environments
• Restores proper rotor thickness for safe and effective braking

Installation Notes and Tips

Ensure the rotor is installed with the directional surface oriented correctly according to the vehicle’s rotation. Verify that the bolt hole pattern matches the Toyota Corolla specifications, including the 87 mm bolt circle diameter and four bolt holes. Check rotor thickness before installation to confirm it meets or exceeds the nominal thickness of 12.5 mm and is above the discard thickness of 11.5 mm. Clean the rotor surface to remove any protective coatings or debris before mounting to ensure optimal brake pad contact.

Quality Assurance and Warranty

Dynamite Friction manufactures the 631-76006R rotor to meet industry standards for durability and performance. The rust-resistant coating and zinc silver hat finish contribute to long-term reliability. Warranty details are provided by the manufacturer and should be reviewed prior to installation to understand coverage specifics.