Dynamite Friction 631-76125R Disc Brake Rotor - Front Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver (part number 631-76125R) is engineered for Toyota RAV4 models requiring reliable braking performance. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance heat dissipation and maintain consistent stopping power under demanding conditions.

• Compatible with Toyota RAV4 vehicles
• Directional drilled and slotted surface for improved brake pad bite and heat management
• Vented rotor design to reduce brake fade
• Rust-resistant zinc silver hat finish for corrosion protection
• Nominal thickness of 25 mm with a discard thickness of 23 mm
• 5 bolt holes with a bolt circle diameter of 114.3 mm
• Overall diameter of 275 mm and center hole diameter of 62 mm

Detailed Product Features and Specifications

This DFC Brake Rotor - Drilled and Slotted - Silver from Dynamite Friction is constructed with a vented rotor design that allows air to flow between the rotor surfaces, helping to dissipate heat more effectively during braking. The rotor’s surface is both drilled and slotted in a directional pattern, which aids in removing brake dust, gases, and water from the contact area, improving braking consistency and reducing the risk of brake fade. The rotor’s nominal thickness is 25 mm, with a discard thickness of 23 mm, ensuring it meets safety standards for wear limits.

The rotor features a plain disc finish combined with a zinc silver coating on the hat area, providing rust resistance and extending the rotor’s service life. It includes five bolt holes with a bolt circle diameter of 114.3 mm and stud/lug hole diameter of 14.5 mm, matching the specifications required for Toyota RAV4 models. The overall diameter of 275 mm and height of 49.3 mm ensure proper fitment and compatibility.

About the DFC Brake Rotor - Drilled and Slotted - Silver Product Line

The DFC Brake Rotor - Drilled and Slotted - Silver line by Dynamite Friction focuses on delivering rotors with enhanced surface designs that improve braking performance and rotor longevity. This product line incorporates drilled holes and slots arranged directionally to optimize heat dissipation and debris removal, which is critical for maintaining brake efficiency in everyday driving and more demanding conditions. The silver zinc coating on the rotor hat provides additional corrosion resistance, making these rotors suitable for various environments.

Applications and Problem Solving

• Replacement rotor for worn or warped brake rotors on Toyota RAV4
• Improves heat dissipation to reduce brake fade during extended braking
• Helps maintain consistent braking performance in wet or dusty conditions
• Addresses rotor corrosion issues with rust-resistant coating
• Enhances brake pad contact and reduces brake noise through slotted and drilled design

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 23 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify bolt hole alignment with the vehicle’s hub using the 5-bolt pattern and 114.3 mm bolt circle diameter. Proper torque specifications should be followed to avoid rotor warping. Directional rotors must be installed with the correct rotation direction as indicated by the surface pattern.

Quality Assurance

Dynamite Friction manufactures the 631-76125R rotor to meet or exceed OEM specifications for Toyota RAV4 vehicles. The rust-resistant zinc silver coating and vented rotor design contribute to durability and performance consistency. While no specific warranty information is provided, the product is engineered for reliable service life under normal operating conditions.