Dynamite Friction 631-76153R Disc Brake Rotor - Front Right

Drilled and Slotted Front Right Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Silver, part number 631-76153R, is a vented disc brake rotor built for the front right position on select Toyota C-HR models. It features a slotted X drilled surface, zinc silver hat finish, and a rust resistant coating for a clean, service-ready appearance.

Fits 2018-2022 Toyota C-HR, front right, with application-specific notes for build date, country of origin, and VIN digit where listed. The 631-76153R rotor is sized with a 299 mm outside diameter, 49.6 mm height, 62 mm center hole diameter, and 114.3 mm bolt circle diameter.

Key Features

• Drilled and slotted brake surface for consistent pad contact
• Vented rotor construction for front brake use
• Directional braking surface design
• Plain disc finish with zinc silver hat finish
• Rust resistant coating for added surface protection
• 5-bolt, 5-lug pattern with 114.3 mm bolt circle diameter
• Nominal thickness: 28 mm; discard thickness: 25 mm

DFC Brake Rotor Line Details

The DFC Brake Rotor - Drilled and Slotted - Silver line focuses on direct-fit replacement rotors with a performance-oriented surface pattern and corrosion-resistant finish. For Toyota C-HR brake service, this line provides a rotor specification matched to the front right position and the listed vehicle build details.

Detailed Description

Part number 631-76153R is a front right disc brake rotor for Toyota C-HR applications from 2018 through 2022. The rotor uses a vented design with drilled and slotted braking surfaces to support even pad interaction, while the zinc silver hat finish and rust resistant coating help maintain appearance in everyday driving conditions. This rotor is specified with a 299 mm outside diameter, 28 mm nominal thickness, and 62 mm center hole diameter for proper fitment on the listed vehicles.

This part cross-references Monroe Shocks & Struts (e.g., 172286, 182286) for the same application.

What This Rotor Helps Address

• Brake pulsation caused by a worn or uneven front rotor surface
• Reduced braking consistency from heat-worn rotor faces
• Surface corrosion on the rotor hat and exposed metal areas
• Noise or vibration related to rotor wear at the front right wheel
• Brake service needs on a Toyota C-HR front right brake position

Installation Notes and Tips

Verify the vehicle build details before ordering, especially the 2018 Toyota C-HR notes for VIN digit and production timing, as well as the 2020-2022 Turkey-built application note. Confirm rotor dimensions, bolt pattern, and directional orientation before installation. Always inspect pads, caliper condition, and hub surfaces during brake service to help ensure proper rotor seating.

Quality Assurance

Dynamite Friction identifies this rotor with a rust resistant coating and corrosion-resistant hat finish for dependable service appearance. The part number 631-76153R is built to match the listed Toyota C-HR front right applications and rotor specifications.