Dynamite Friction 633-13032R Disc Brake Rotor - Rear Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-13032R) is engineered for Subaru vehicles including the Baja, Legacy, and Outback models. Designed to enhance braking performance, this rotor features a directional, slotted and drilled surface to improve heat dissipation and reduce brake fade.

• Compatible with Subaru Baja, Legacy, and Outback
• Directional slotted and drilled surface for improved braking
• Solid disc brake rotor with zinc black hat finish
• Rust resistant coating for extended durability
• Nominal thickness of 10 mm and discard thickness of 8.5 mm
• 5 bolt holes with 12.9 mm diameter and 100 mm bolt circle diameter
• Overall diameter of 290 mm and height of 67.3 mm

Detailed Product Features and Specifications

This Dynamite Friction rotor is a solid disc type, measuring 290 mm in outside diameter and 67.3 mm in overall height. The rotor’s surface is both drilled and slotted, which helps to channel away gases and debris generated during braking, maintaining consistent pad contact and reducing the risk of brake fade. The directional design ensures optimal performance when installed correctly. The rotor hat is finished with a zinc black coating to resist corrosion, complemented by an overall rust-resistant coating on the rotor surface. With a nominal thickness of 10 mm and a discard thickness of 8.5 mm, this rotor provides a reliable service life before replacement is necessary. The 5 bolt holes, each 12.9 mm in diameter, fit a 100 mm bolt circle diameter, matching the factory specifications for the listed Subaru models.

About the DFC Brake Rotor - Drilled and Slotted - Black Line

The DFC Brake Rotor - Drilled and Slotted - Black product line from Dynamite Friction focuses on rotors that combine drilled holes and slots with a corrosion-resistant black zinc finish on the hat. This line is designed to offer enhanced heat dissipation and improved braking response while maintaining durability through rust-resistant coatings. The drilled and slotted design is directional, requiring proper installation orientation to maximize performance benefits.

Applications and Problem Solving

• Reduces brake fade during heavy braking or towing
• Improves heat dissipation to prevent rotor warping
• Helps maintain consistent braking performance in wet conditions
• Resists rust and corrosion for longer rotor life
• Restores braking efficiency on Subaru Baja, Legacy, and Outback models

Installation Notes and Tips

Ensure the rotor is installed with the directional surface facing the correct rotation direction as indicated by the manufacturer. Verify bolt hole alignment with the vehicle’s hub using the 5 bolt holes spaced on a 100 mm bolt circle diameter. Check rotor thickness before installation; replace if below the discard thickness of 8.5 mm. Proper torque specifications should be followed to avoid rotor damage or uneven wear.

Quality Assurance

Dynamite Friction rotors are manufactured to meet or exceed OEM specifications for fit, form, and function. The rust-resistant coatings and zinc black hat finish contribute to long-term durability. While specific warranty details are not provided, these rotors are designed for reliable performance on Subaru Baja, Legacy, and Outback vehicles when installed and maintained according to manufacturer guidelines.