Dynamite Friction 633-13037R Disc Brake Rotor - Front Right

Overview of Dynamite Friction DFC Brake Rotor

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-13037R) is engineered for Subaru Crosstrek and Impreza models. This vented disc brake rotor features a directional, slotted, and drilled surface designed to enhance braking performance and heat dissipation.

• Compatible with Subaru Crosstrek and Impreza
• Directional drilled and slotted surface for improved brake pad bite
• Vented rotor design for efficient heat dissipation
• Black zinc-coated hat finish for corrosion resistance
• Nominal thickness of 24 mm with a discard thickness of 22 mm
• 5 bolt holes with 13 mm diameter and 100 mm bolt circle diameter
• Outside diameter of 294 mm and height of 48.5 mm
• Rust resistant coating to extend rotor life

Details on the DFC Brake Rotor - Drilled and Slotted - Black Line

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors that combine drilled holes and slots with a black zinc-coated hat finish. This design supports enhanced braking efficiency by allowing gases and debris to escape while maintaining corrosion resistance. The vented rotor construction further aids in heat management, making it suitable for Subaru Crosstrek and Impreza vehicles requiring reliable stopping power under varied driving conditions.

Technical Specifications and Features

This disc brake rotor has a nominal thickness of 24 mm and a discard thickness of 22 mm, ensuring a clear service life indicator. The rotor’s outside diameter measures 294 mm, with a height of 48.5 mm. It features a 5-bolt hole pattern with 13 mm diameter holes and a 100 mm bolt circle diameter, matching Subaru Crosstrek and Impreza specifications. The rotor surface is both drilled and slotted in a directional pattern to optimize brake pad contact and reduce heat buildup. The hat section is finished with a black zinc coating to resist rust and corrosion, extending the rotor’s durability.

Applications and Problem Solving

• Improves braking performance for Subaru Crosstrek and Impreza models
• Reduces brake fade during extended or aggressive braking
• Helps prevent rotor warping caused by excessive heat
• Minimizes brake dust and debris buildup on rotor surface
• Protects against rust and corrosion for longer rotor life

Installation Notes and Tips

Ensure the rotor thickness is above the discard thickness of 22 mm before installation. Clean the rotor surface to remove any protective coatings or contaminants prior to mounting. Verify the 5-lug bolt pattern and 100 mm bolt circle diameter match your vehicle’s hub. Directional rotors must be installed with the correct rotation direction for optimal performance. Use proper torque specifications on lug nuts to avoid rotor distortion.

Quality Assurance

Dynamite Friction manufactures the 633-13037R rotor to meet OEM fitment and performance standards for Subaru Crosstrek and Impreza vehicles. The rust-resistant coating and vented design contribute to extended service life. While no specific warranty information is provided, Dynamite Friction products are engineered for consistent quality and durability in automotive braking applications.