Dynamite Friction 633-40044R Disc Brake Rotor - Rear Right

Overview of the DFC Brake Rotor - Drilled and Slotted - Black

The Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black (part number 633-40044R) is engineered for reliable braking performance on select Dodge, Mercedes-Benz, and Volkswagen vehicles. Designed with a directional, slotted and drilled surface, this rotor enhances heat dissipation and braking consistency for vans like the Crafter and Sprinter models.

• Disc type: Solid disc brake rotor with drilled and slotted surface
• Nominal thickness: 16 mm with a discard thickness of 14 mm
• Overall height and rotor height: 71.2 mm
• Outside diameter: 298 mm
• Hat finish: Zinc black coating for corrosion resistance
• Rust resistant coating applied to extend rotor life
• Bolt hole quantity: 6 with 15.3 mm diameter
• Center hole diameter: 85 mm
• Bolt circle diameter: 130.2 mm
• Directional brake surface optimized for improved braking efficiency

Detailed Product Description

This Dynamite Friction DFC Brake Rotor - Drilled and Slotted - Black is a solid rotor designed to meet the braking demands of commercial and passenger vans such as the Dodge Crafter, Mercedes-Benz Sprinter 2500, Sprinter 3500, and Volkswagen Crafter Van. The rotor features a drilled and slotted surface that helps to reduce brake fade by improving heat dissipation and allowing gases and debris to escape during braking. The zinc black hat finish and rust resistant coating protect the rotor from corrosion, ensuring durability in various driving conditions.

The rotor’s 6-bolt pattern with a 130.2 mm bolt circle diameter and 15.3 mm bolt hole diameter matches the factory specifications for the listed vehicles. With a nominal thickness of 16 mm and a discard thickness of 14 mm, this rotor maintains structural integrity while providing consistent braking performance. The directional surface design is intended to optimize braking efficiency and pad contact.

DFC Brake Rotor - Drilled and Slotted - Black Product Line

The DFC Brake Rotor - Drilled and Slotted - Black line by Dynamite Friction focuses on rotors that combine drilled holes and slots with a corrosion-resistant black zinc finish. This product line is tailored for drivers seeking rotors that offer enhanced heat management and durability without compromising fitment or safety. The drilled and slotted design is directional, which means it is engineered to be installed in a specific orientation to maximize braking performance.

Applications and Problem Solving

• Compatible with Dodge Crafter and Volkswagen Crafter Van models
• Designed for Mercedes-Benz Sprinter 2500 and Sprinter 3500 vans
• Helps reduce brake fade during heavy or repeated braking
• Improves heat dissipation to prevent rotor warping
• Resists rust and corrosion for longer service life

Installation Notes and Tips

• Ensure correct directional orientation of the rotor during installation
• Verify bolt hole alignment with vehicle hub (6 bolts, 130.2 mm bolt circle)
• Check rotor thickness before installation; discard if below 14 mm
• Use proper torque specifications for lug nuts to avoid rotor damage
• Inspect brake pads and hardware for wear when replacing rotors

Quality Assurance

Dynamite Friction manufactures the 633-40044R rotor to meet or exceed OEM specifications for fitment and performance. The rust resistant coating and zinc black hat finish contribute to the rotor’s durability. While no specific warranty information is provided, the product is designed for reliable service on compatible Dodge, Mercedes-Benz, and Volkswagen vans when installed and maintained properly.